Aerodynamics Laboratory
This lab includes two subsonic and three supersonic wind tunnels as well as a low-speed smoke tunnel for flow visualization. The principal tunnel used for research is a closed-circuit, single-return, low-speed wind tunnel with a 3 ft by 4.25 ft test section (see Figs. 1 and 2) in which the flow speed may be varied from 0 to approximately 140 mph. Different types of mounting hardware and balances are available, including floor mounted with a six degree-of freedom balance and angle of attack control, as shown in Fig. 5, and sting-mounted with a three degree-of-freedom balance.
![Test Section 1 Test Section 1](../../images/virticle/garbage/image4749.jpg)
Fig. 5 Test Section of 3 ft by 4.25 ft Tunnel with "Cessna" Model
![Truck model 1 Truck model 1](../../images/virticle/garbage/image4748.jpg)
Fig. 6 Truck Model in Test Section with Ground Plane
Although used primarily for instruction of undergraduate students, an open-circuit, low-speed wind tunnel with a 2 ft by 2 ft test section (see Fig. 7) can be used for research. In this tunnel the wind speed may be varied from 0 to 120 mph.
![Low speed Wind Tunnel 1 Low speed Wind Tunnel 1](../../images/virticle/garbage/image4750.jpg)
Fig. 7 Low-speed Open-Circuit Tunnel
For more information on Aerodynamics Laboratory click here
Coordinator: Anwar Ahmed
aahmed@eng.auburn.edu
(334) 844-6817