College of Engineering / Department of Mechanical Engineering / Dr. Sabit Adanur / Publications

Publications

Refereed Journal Articles

  • Jayswal, J. Liu, G. Harris, R. Mailen and S. Adanur, Creep behavior of 3D printed polymer composites, Journal of Polymer Engineering and Science, Published online 31 August 2023, doi:10.1002/pen.26486.
  • Adanur, A. Jayswal, K. O. Griffin and J. L. Hancock, Additive Manufacturing of Weft Knitted and Braided Fabric Structures with Fused Deposition Modeling, Journal of the Textile Institute, https://doi.org/10.1080/00405000.2023.2201910, Published 25 April 2023.
  • Jayswal, R. W. Mailen, J. Liu, G. Harris, M. Siwakoti, and S. Adanur, Thermo-mechanical behavior of 3D printed fabric structures, Journal of Polymer Engineering and Science, 63:1725-1736, June 2023, http://doi.org/10.1002/pen.26319.
  • Jayswal, J. Liu, G. Harris and S. Adanur, Thermo-mechanical properties of composite filaments for 3D printing of fabrics, Journal of Thermoplastic Composite Materials, https://doi.org/10.1177/08927057231163489, 14 March 2023.
  • Alby, A. Jayswal, S. Morris, W. McAtee, V. Gowda and S. Adanur, A Novel Face Mask Design with Improved Properties for COVID-19 Prevention, Textile Research Journal, Vol. 93(11-12), pp. 2754-2764, 23 May 2023, https://doi.org/10.1177/00405175221146295.
  • Jayswal, A., and Adanur, S., “An overview of additive manufacturing methods, materials, and applications for flexible structures”, Journal of Industrial Textiles, Vol. 52, pp. 1-42, 2022, https://doi.org/10.1177/15280837221114638.
  • Jayswal, A., and Adanur, S., “Effect of heat treatment on crystallinity and mechanical properties of the flexible structures 3D printed with fused deposition modeling”, Journal of Industrial Textiles, 2022, Vol. 51(2S), pp. 2616S-2641S, https://journals.sagepub.com/doi/10.1177/15280837211064937.
  • Adanur, S., and Jayswal, A., “Filtration mechanisms and manufacturing methods of face masks: An Overview”, Journal of Industrial Textiles, 2022, Vol. 51(3S), pp. 3683S-3717S, DOI: 10.1177/1528083720980169.
  • Jayswal, A., and Adanur, S., “Characterization of PLA/TPU composite filaments manufactured for 3D printing with FDM”, Journal of Thermoplastic Composite Materials, https://doi.org/10.1177/08927057211062561, Published online, 2 December 2021, pp. 1-22.
  • Adanur, S., and Jayswal, A., “Additive Manufacturing of Interlaced Fibrous Structures”, Rapid Prototyping Journal, Emerald Insight at: https://www.emerald.com/insight/1355-2546.htm, DOI 10.1108/RPJ-05-2020-0095, 29 March 2021.
  • Adanur, S., and Jayswal, A., “Filtration mechanisms and manufacturing methods of face masks: An Overview”, Journal of Industrial Textiles, December 2020, journals.sagepub.com/home/jit, DOI: 10.1177/1528083720980169.
  • Shen, Y., Branscomb, D., and Adanur, S., “Effect of joint stiffness on torsional stiffness of open lattice composite structures”, Journal of Industrial Textiles, https://journals.sagepub.com/doi/pdf/10.1177/1528083719881818, 18 2019.
  • Shen, Y., and Adanur, S., “Mechanical analysis of the auxetic behavior of novel braided tubular structures by the finite element method”, Textile Research Journal, https://doi.org/10.1177/0040517519851840, 29 May 2019.
  • Liu, W., and Adanur, S., Desulfurization Properties of Activated Carbon Fibers, Journal of Engineered Fibers and Fabrics, Vol. 9, Issue 2, June 2014, pp. 70-75.
  • Shen, Y., Meir, A. J., Cao, Y., and Adanur, S., “Finite Element Analysis of Monofilament Woven Fabrics under Uniaxial Tension”, Journal of the Textile Institute, published online: 10 April 2014, http://www.tandfonline.com/doi/full/10.1080/00405000.2014.906098.
  • Adanur, S., and Liu, W., “Desulfurization Properties of Modified Activated Carbon Fibers and Activated Carbon Fiber Paper”, Journal of Industrial Textiles, Published DOI: 10.1177/1528083713502997  
  • Adanur, S., and Zheng, H., “Synthesis and Characterization of Sulfonated Polyimide Based Membranes for Proton Exchange Membrane Fuel Cells”, Journal of Fuel Cell Science and Technology, Aug. 2013, Vol. 10, 041001, pp. 1-5.
  • Liu, W., Yee, S., and Adanur, S., “Properties of Electrospun PVA/nanoclay Composites”, Journal of the Textile Institute, 2013, http://www.tandfonline.com/doi/abs/10.1080/00405000.2013.819156
  • Adanur, S., and Vakalapudi, J. S., “Woven Fabric Design and Analysis in 3D Virtual Reality, Part 1: Computer Aided Design and Modeling of Interlaced Structures”, Journal of the Textile Institute, DOI: 10.1080/00405000.2012.753698, published January 10, 2013. 
  • Gocek, I., and Adanur, S., “Effect of Processing Parameters on Polypropylene Film Properties”, International Journal of Modern Engineering Research (IJMER), Vol. 2, Issue 5, Sep.-Oct. 2012, pp. 3056-3060.
  • Gocek, I., and Adanur, S., “Effect of Nanoclay Amount and Compatibilizer Presence on Thermal, Morphological and Mechanical Behaviour of Nanoclay Reinforced Composite Polypropylene Cast Film”, Materials Testing, 54 (2012) 5, pp. 318-329 (German/English).
  • Adanur, S., and Vakalapudi, J. S., “Woven Fabric Design and Analysis in 3D Virtual Reality, Part 2: Predicting Fabric Properties with the Model”, Journal of the Textile Institute (DOI:10.1080/00405000.2012.745236, published 3 December 2012).
  • Adanur, S., and Selver, E., “Nanoclay/Polypropylene Composite Monofilament Processing and Properties using Twin and Single Screw Extruders”, International Journal of Polymeric Materials (published 5/17/2012: http://www.tandfonline.com/doi/abs/10.1080/00914037.2011.641696).
  • Keskin, R., and Adanur, S., "Improving Toughness of Polypropylene with Thermoplastic Elastomers in Injection Molding", Polymer-Plastics Technology and Engineering, 50:20-28, January 2011.
  • Selver, E., and Adanur, S., “Processing and Property Relationship of Nanoclay Reinforced Polypropylene Monofilaments, Journal of Industrial Textiles”, Vol. 40, No. 2, Oct. 2010, pp. 123-137.
  • Isikel, L., Gocek, I., and Adanur, S., “Design and Characterization of Nonwoven Fabrics for Gas Diffusion Layer in Polymer Electrolyte Membrane Fuel Cell”, The Journal of the Textile Institute, Vol. 101, No. 11, Nov. 2010, pp. 1006-1014. 
  • Yacoob, C., Liu, W., and Adanur, S., “Properties and Flammability of Electrospun PVA and PVA/Laponite® Membranes”, Journal of the Industrial Textiles, Vol. 40, No. 1, July 2010, pp. 33-48.
  • Liu, W., and Adanur, S., “Properties of Electrospun Polyacrylonitrile Membranes and Chemically-Activated Carbon Nanofibers”, Textile Research Journal, Vol. 80(2), pp. 124-134, Jan. 2010.
  • Ascioglu, B., Adanur, S., Gumusel, L., and Bas, H., “Transverse Direction Thermal Conductivity Modeling of Nano-micro Fiber Reinforced Composites”, Textile Research Journal, Vol. 79 (12), 2009, pp. 1059-1066.
  • Yuksekkaya, M. E., and Adanur, S., “Analysis of Polymeric Braided Tubular Structures Intended for Medical Applications”, Textile Research Journal, 2009; Vol. 79, No. 2, pp. 99-109.
  • Yuksekkaya, M.E., Thomas, H., and Adanur, S., “Influence of the Fabric Properties on Fabric Stiffness for the Industrial Textiles”, Tekstil and Konfeksiyon (English), April 2008, pp. 263-267.
  • Adanur, S., and Qi, J., "Property Analysis of Denim Fabrics Made on Air-Jet Weaving Machine, Part 2: Effects of Tension on Fabric Properties", Textile Research Journal, Vol. 78(1), Jan. 2008, pp. 10-20.
  • Adanur, S., and Qi, J., "Property Analysis of Denim Fabrics Made on Air-Jet Weaving Machine, Part 1: Experimental System and Tension Measurements", Textile Research Journal, Vol. 78(1), Jan. 2008, pp. 3-9.
  • Adanur, S., and Ascioglu, B., “Nanocomposite Fiber Based Web and Membrane Formation and Characterization”, Journal of Industrial Textiles, Vol. 36, No. 4, April 2007, pp. 311-327.
  • Elton, D. J., Hayes, D. W., and Adanur, S., “Bubblepoint Testing of Geotextiles: Apparatus and Operation”, American Society for Testing Materials (ASTM) Geotechnical Testing Journal, Vol. 30, No. 1, Jan. 2007. 
  • Onal, L., and Adanur, S., “Modeling of Elastic, Thermal and Strength/Failure Analysis of 2D Woven Composites – A Review”, Applied Mechanics Reviews (AMR), Vol. 60, Issue 1, pp. 37-49, Jan. 2007.
  • Irsale, S., and Adanur, S., “Design and Characterization of Polymeric Stents, Journal of Industrial Textiles, Vol. 35, No. 3, January 2006, pp. 189-199.
  • Onal, L., and Adanur, S., “Optimization of Compression Molding Process in Laminated Woven Composites”, Journal of Reinforced Plastics and Composites”, Vol. 24, No. 7, 2005, pp. 775-780.
  • Adanur, S., and Onal, L., “Analysis of a Novel 3D Hybrid Woven/Knitted Fabric Structure, Part II: Mechanical Model to Predict Modulus and Extension”, Textile Research Journal, 74(10), 865-871, October 2004.
  • Onal, L., and Adanur, S.,, “Analysis of a Novel 3D Hybrid Woven/Knitted Fabric Structure, Part I: Geometric Model and Verification”, Textile Research Journal, 74(9), 827-832, September 2004.
  • Adanur, S., and Turel, T., “Effects of Air and Yarn Characteristics in Air-Jet Filling Insertion, Part II:Yarn Velocity Measurements with a Profiled Reed”, Textile Research Journal, 7(8), 657-661, August 2004.
  • Adanur, S., “Dynamic Analysis of Air-Jet Filling Insertion: Effect of Timing on Air and Yarn Velocity”, Developments in Theoretical and Applied Mechanics, Eds. H. Mahfuz and M. V. Hosur, Vol. XXII, 2004, pp. 202-207.
  • Turel, T., Bakhtiyarov, S., and Adanur, S.,  “Effects of Air and Yarn Characteristics in Air-Jet Filling Insertion, Part I: Air Velocity and Air Pressure Measurements”, Textile Research Journal, 74(7), 592-597, July 2004.
  • Adanur, S., Mcclain, A., and Xu, B., “A Novel Approach to Fast Net-Shape Manufacturing of Braided Epoxy Composites”, Journal of Elastomers and Plastics, Vol. 35, No. 3, July2003.
  • Adanur, S., and Arumugham, Y., “Characteristics of Ultraviolet Cured Glass/Epoxy Composites, Part 2: Results and Discussion”, Journal of Industrial Textiles, Vol. 32, No. 2, October 2002, pp. 107-118.
  • Adanur, S., and Arumugham, Y., “Characteristics of Ultraviolet Cured Glass/Epoxy Textile Composites, Part 1: Experimental Procedures and Testing”, Journal of Industrial Textiles, Vol. 32, No. 2, October 2002, pp. 93-106.
  • Onal, L., and Adanur, S., “Effect of Stacking Sequence on the Mechanical Properties of Glass/Carbon Hybrid Composites Before and After Impact”, Journal of Industrial Textiles, Vol. 31, No. 4, April 2002, pp. 255-271.
  • Adanur, S., and Onal, L., “Factors Affecting the Mechanical Properties of Laminated Glass/Graphite-Epoxy Hybrid Composites”, Journal of Industrial Textiles, Vol. 30, No. 3, January 2002.
  • Elton, D. J., Mohamed, T., and Adanur, S., “BubblePoint and AOS Testing of Geotextiles”, Proceedings of the Geosynthetics Conference, 2001, Portland, Oregon, Feb. 12-14, 2001.
  • Yang, B., Kozey, V., Adanur, S., and Kumar, S., "Bending, Compression and Shear Behavior of Woven Glass Fiber-Epoxy Composites", Composites: Part B: Engineering, 31 (2000), pp. 715-721.
  • Liao, T., and Adanur, S., “3D Structural Simulation of Tubular Braided Fabrics for Net-Shape Composites”, Textile Research Journal, 70(4), pp. 297-303, April 2000.
  • Vickers, A. D., Beale, D. G., Wang, Y. T., and Adanur, S., "Analysis of Yarn-to-Surface Friction Via Data Acquisition and Digital Imaging Techniques", Textile Research Journal, 70(1), 36-43, January 2000.
  • Adanur, S., and Liao, T., "Fiber Arrangement Characteristics and Their Effects on Nonwoven Tensile Behavior", Textile Research Journal, 69(11), 816-824, Nov. 1999.
  • Bakhtiyarov, S., and Adanur, S., “Airflow over Wavy Yarn in Air-jet Filling Insertion”, Mathematical & Computational Applications, Vol. 4, No. 1, pp. 1-7, 1999.
  • Adanur, S., and Bakhtiyarov, S., “Numerical Study of Collision Efficiency of Dust Particles”, Mathematical & Computational Applications, Vol. 4, No. 1, pp. 297-303, 1999.
  • Liao, T., and Adanur, S., "Computerized Failure Analysis of Nonwoven Fabrics Based on Fiber Failure Criterion", Textile Research Journal, 69(7), 489-496, July 1999.
  • Zhang, Q., Beale, D., Broughton, R. M., and Adanur, S., "Analysis of Circular Braiding Process, Part 2: Mechanics Analysis of the Circular Braiding Process and Experiment", ASME Journal of Manufacturing Science and Engineering, August 1999, Vol. 121, pp. 351-359.
  • Adanur, S., and Liao, T., "3D Modeling of Textile Composite Preforms", Composites, Part B: Engineering, 29B (1998), pp. 787-793.
  • Liao, T., and Adanur, S., "A Novel Approach to Three Dimensional Modeling of Interlaced Fabric Structures", Textile Research Journal, 68(11), November 1998, pp. 841-847.
  • Adanur, S., Hou, Z., and Broughton, R. M., "Recovery and Reuse of Waste PVC Coated Fabrics, Part 2: Analysis of the Components Separated from PVC Coated PET Fabrics", Journal of Coated Fabrics, Vol. 28, October 1998.
  • Adanur, S., Hou, Z., and Broughton, R. M., "Recovery and Reuse of Waste PVC Coated Fabrics, Part 1: Experimental Procedures and Separation of Fabric Components", Journal of Coated Fabrics, Vol. 28, July 1998, pp. 37-55.
  • Adanur, S., and Liao, T., "Computer Simulation of Mechanical Properties of Nonwoven Geotextiles in Soil-Fabric Interaction", Textile Research Journal, 68(3), March 1998, pp. 155-162.
  • Adanur, S., and Tewari, A., "An Overview of Military Textiles", Indian Journal of Fibre & Textile Research (IJFTR), 22(4), December 1997, pp. 348-352.
  • Wang, S., Adanur, S. and Jang, B. Z., " Mechanical and Thermo-Mechanical Failure Mechanism Analysis of Fiber/Filler Reinforced Phenolic Matrix Composites", Composites Part B, 28B, (1997), 215-231.
  • Liao, T., Adanur, S., and Drean, J.,"Predicting the  Mechanical Properties of Nonwoven Geotextiles with the Finite Element Method", Textile Research Journal, Vol. 67, No. 10, October 1997, pp. 753-760.
  • Zhang, Q., Beale, D., Adanur, S., Broughton, R. M., Walker, R. P., "Structural Analysis of Two Dimensional Braided Fabric", Journal of the Textile Institute, Vol. 88, Part 1, No. 1, 1997, pp. 41-52.
  • Adanur, S., and Tam, C. A., "On-machine Interlocking of 3D Laminate Structures for Composites", Composites, Part B:  Engineering, 28B, 1997, pp. 497-506.
  • Basu Mallick, S., Elton, D. J., and Adanur, S., "An Experimental Characterization of Soil-Woven Geotextile Interface in Large Box Pullout Tests", Geosynthetics '97, March 1997, pp. 927-940.
  • Adanur, S., and Bakhtiyarov, S., "Analysis of Air Flow in Single Nozzle Air-Jet Filling Insertion: Corrugated Channel Model", Textile Research Journal, 66(6), June 1996, pp. 401-406.
  • Mallick, S. B., Zhai, H., Adanur, S., and Elton, D. J., "Pullout and Direct Shear Testing of Geosynthetic Reinforcement: A State of the Art Report", Transportation Research Record, No. 1534, Soils, Geology and Foundations, Transportation Research Board, National Research Council, National Academy Press, Washington, DC, 1996, pp. 80-90.
  • Zhai, H., Basu Mallick, S., Elton, D., and Adanur, S., "Performance Evaluation of Nonwoven Geotextiles in Soil-Fabric Interaction", Textile Research Journal, Vol. 66, No. 4, April 1966.
  • Adanur, S., and Allen, B., "First Results on the Effects of ISO 9000 in the United States Textile Industry", Benchmarking for Quality Management and Technology, Vol. 2, No. 3, 1995, pp. 55-66.
  • Adanur, S., Tsao, Y. P., and Tam, C. W., "Improving Fracture Resistance of Laminar Textile Composites by Third Direction Reinforcement", Composites Engineering, Vol. 5, No. 9, 1995, pp. 1149-1158.
  • Adanur, S., "Effects of Fabric Structural Parameters on Fabric Modulus", Melliand Textilberichte, Vol. 76, No. 6, June 1995 (German/English), pp. 396-399.
  • Adanur, S., "Effects of Forming Fabric Structural Parameters on Sheet Properties", TAPPI Journal, Vol. 77, No. 10, October 1994.
  • Adanur, S., Walker, R. P., Broughton, R. M., and Beale, D., "Weaving Technology - What Next?", Melliand Textilberichte, English/German, Vol. 75, No. 4, April 1994.
  • Adanur, S., and Mohamed, M. H., "Analysis of Yarn Motion in Single-nozzle Air-Jet Filling Insertion, Part II: Experimental Validation of the Theoretical Models and Statistical Analysis", Journal of the Textile Institute, Vol. 83, No. 1, 1992.
  • Adanur, S., and Mohamed, M. H., "Analysis of Yarn Motion in Single-nozzle Air-Jet Filling Insertion, Part I: Theoretical Models for Yarn Motion", Journal of the Textile Institute, Vol. 83, No. 1, 1992.
  • Adanur, S., and Mohamed, M. H., "Analysis of Yarn Tension in Air-Jet Filling Insertion", Textile Research Journal, Vol.61, No. 5, May 1991.
  • Adanur, S., and Mohamed, M.H., "Analysis of Air Flow in Air-Jet Filling Insertion", Textile Research Journal, Vol. 61, No.5, May 1991.
  • Adanur, S., and Mohamed, M. H., "Weft Insertion on Air-Jet Looms: Velocity Measurement and Influence of Yarn Structure, Part II: Effects of System Parameters and Yarn Structure", Journal of the Textile Institute, Vol. 79, No. 2, 1988.
  • Adanur, S., and Mohamed, M. H., "Weft Insertion on Air-Jet Looms: Velocity Measurement and Influence of Yarn Structure, Part I: Experimental System and Computer Interface", Journal of the Textile Institute, Vol. 79, No. 2, 1988.
  • Salama, M., Adanur, S., and Mohamed, M.H., "Mechanics of a Single Nozzle Air-Jet Filling Insertion System, Part III: Yarn Insertion through Tubes", Textile Research Journal, Vol. 57, No.1, January 1987.

Conference Proceedings

  1. Adanur, S., Latest Developments in Paper Machine Clothing as it Relates to Papermaking, Proceedings of TAPPIcon 2023, Technical Association of the Pulp and Paper Industry, April 22-26, 2023, Atlanta, GA.
  2. Adanur, S., and Liu, W, “Desulfurization Properties of Activated Carbon Fibers in Dry Conditions”, Proceedings of the International Istanbul Textile Congress 2013, New Materials, May 30-31, 2013, Istanbul, Turkey.
  3. Adanur, S., “A Novel Braided Structure to Increase Compression and Torsion Resistance of Composites”, Proceedings of the 5th International R&D Project Brokerage Event, Bursa, Turkey, 4-5 April 2013.
  4. Adanur, S., “Prevention of PEM Fuel Cell Poisoning via Adsorption using Activated Carbon Fiber Based Cathode Filters”, Proceedings of the 5th International R&D Project Brokerage Event, Bursa, Turkey, 4-5 April 2013.
  5. Adanur, S., “Health and Safety Effects of Nanoparticles Embedded in Textile Materials”, Proceedings of the 5th International R&D Project Brokerage Event, Bursa, Turkey, 4-5 April 2013.
  6. Selver, E., and Adanur, S., Properties of Nanoclay Added Composite Polypropylene Monofilaments Using Twin and Single Screw Extruders, Fiber Society International Symposium on New Frontiers in Fiber Materials Science, Oct. 11-13, 2011, Charleston, SC.
  7. Adanur, S., A Novel Filling Insertion System for Weaving, The 3rd International R&D Project Brokerage Event, Bursa, Turkey, Feb. 10-11, 2011.
  8. Adanur, S., Conceptual Design and Characterization of 3D Interlaced Fibrous Structures, The 3rd International R&D Project Brokerage Event, Bursa, Turkey, Feb. 10-11, 2011.
  9. Zheng, H., and Adanur, S., “Synthesis and Characterization of Sulfonated Polyimide Based Membrane for Proton Exchange Membrane Fuel Cell Applications”, Alabama Composites Conference, Aug. 24-26, 2010, Birmingham, AL (presented as poster as well).
  10. Liu, W., and Adanur, S., “Activated Carbon Fiber Filter Media in Proton Exchange Membrane Fuel Cells for Automotives”, Techtextil North America Symposium, May 18-20, 2010, Georgia World Congress Center, Atlanta, GA.
  11. Adanur, S., and Selver, E., “Processing and Properties of nanoclay reinforced polypropylene monofilaments”, The 4th International Technical Textiles Congress Proceedings, 16-18 May 2010, Istanbul, Turkey.
  12. Liu, W., and Adanur, S., “Application of Activated Carbon Fibers in Fuel Cell Cathode Filter Media”, The Fiber Society 2009 Spring Conference: International Conference on Fibrous Materials 2009, Shanghai, China, May 27-29, 2009.
  13. Adanur, S., “Nanotechnologies are Coming Your Way”, Industrial Fabrics Association International (IFAI) Expo ’08, October 21-23, 2008, Charlotte, NC.
  14. Adanur, S., and Irsale, S., “Textile Stent Prototyping and Modeling”, Proceedings of the IFAI Expo 2006 Medical Textiles Symposium, Atlanta, Oct. 31, 2006.
  15. Adanur, S., Isikel, L., and Abdelhady, F., “Coated and Laminated Fabrics for Fuel Cells”, Proceedings of the TechTextil Symposium North America, March 28-30, 2006, Atlanta,
  16. Ascioglu, B., and Adanur, S., “Heat Transfer Behavior of Particle Reinforced Nanofibers”, Developments in Theoretical and Applied Mechanics, Eds. H. Mahfuz and M. V. Hosur, Proceedings of the SECTAM XXII, 22nd Southeastern Conference on Theoretical and Applied Mechanics, August 15-17, 2004, Tuskegee, AL.
  17. Irsale, S., and Adanur, S., “Compression Force Modeling of Braided Textile Stents”, Developments in Theoretical and Applied Mechanics, Eds. H. Mahfuz and M. V. Hosur, Proceedings of the SECTAM XXII, 22nd Southeastern Conference on Theoretical and Applied Mechanics, August 15-17, 2004, Tuskegee, AL.
  18. Adanur, S., and Ascioglu, B., “Processing Characterization of PVA Nanofibers in Electrospinning”, Proceedings of the ICCE-11, 11th Annual International Conference on Composites/Nano Engineering, Ed. D. Hui, August 8-14, 2004, Hilton Head, SC.
  19. Ascioglu, B., and Adanur, S., “Modeling of Thermal Conductivity in Nanofiber Composites”, Proceedings of the ICCE-11, 11th Annual International Conference on Composites/Nano Engineering, Ed. D. Hui, August 8-14, 2004, Hilton Head, SC.
  20. Irsale, S., and Adanur, S., “Monofilament Yarns in Braided Vascular Prosthesis”, Proceedings of the TechTextil Symposium North America, March 30-April 1, 2004.
  21. Ascioglu, B., Adanur, S., Patra, P. K., Inan, G., Kim, Y., and Warner, S., “Heat Transfer Modeling in Nanofiber Reinforced Composites”, Proceedings of the ICCE-10, New Orleans, July 20-26, 2003.
  22. Onal, L., and Adanur, S., “A Novel 3D Structure, 3D Hybrid Woven/Knitted Fabric”, Proceedings of the The Fiber Society 2003 Spring Symposium, “Advanced Flexible Materials and Structures: Engineering with Fibers”, June 30-July 2, 2003, Loughborough, England.
  23. Adanur, S., and Onal, L., “Design Characterization of a Novel 3D Hybrid Knitted/Woven Fibrous Structure for Composites”, Proceedings of the 2003 NSF Design, Service and Manufacturing Grantees and Research Conference, January 6-9, 2003, Birmingham, AL.
  24. Adanur, S., Bakhtiyarov, S., and Turel, T., “Dynamic Analysis of Air Flow in Air-jet Filling Insertion, Part II: Air Velocity Measurements”, Proceedings of IMECE 2002 ASME International Mechanical Engineering Congress & Exposition, Nov. 17-22, 2002, New Orleans.
  25. Bakhtiyarov, S., Adanur, S., and Turel, T., “Dynamic Analysis of Air Flow in Air-jet Filling Insertion, Part I: Air Pressure Measurements”, Proceedings of IMECE 2002 ASME International Mechanical Engineering Congress & Exposition, Nov. 17-22, 2002, New Orleans.
  26. Adanur, S., and Onal, L., “Experimental Analysis of Textile Composites”, Proceedings of the TechTextil North America Symposium, 2002, Atlanta,
  27. Elton, D. J., Howie, D. L., and Adanur, S., “Bubblepoint Testing of Nonwoven Geotextiles”, Proceedings of the 37th Symposium on Engineering Geology and Geotechnical Engineering”, 2002.
  28. Onal, L., and Adanur, S., “Effect of Fiber Content and Stacking Sequence on Low Velocity Impact Behavior of Glass/Carbon Hybrid Epoxy Composites”, ICCE/8, Proceedings of the Eighth Annual International Conference on Compsites Engineering, August 5-11, 2001, Tenerife, Spain.
  29. Adanur, S., and Onal, L., “Effects of Production Variables on Stress-Strain Behavior of Glass/Epoxy Textile Composites in Compression Molding”, Proceedings of the American Society of Mechanical Engineers (ASME), Aerospace Division, AD-Vol. 63, pp. 43-49, Nov. 2000.
  30. Adanur, S., and Onal, L., “Impact Failure Analysis of Glass/Epoxy Textile Composites” in Dynamic Failure in Composite Materials and Structures, Proceedings of American Society of Mechanical Engineers (ASME), AMD-Vol. 243, pp. 105-114, Nov. 2000.
  31. Adanur, S., Xu, B., and Orak, H., “Braided Composite Automotive Chassis Frame”, Proceedings of the ICCE/7 Seventh International Conference on Composites Engineering, July 2-8, 2000, Denver, CO, p. 5.
  32. Elton, D. J., and Adanur, S., “Varying Pore Sizes in Hydroentangled Geotextiles”, Proceedings of the Techtextil North America International Trade Fair for Technical Textiles and Nonwovens, Vol. 3, March 22-24, 2000, Atlanta, GA.
  33. Adanur, S. (50%), and Xu, B. (50%), “Design and Manufacturing Automotive Chassis Frame with Net Shape Braided Composite Structures”, Proceedings of the 2000 NSF Design and Manufacturing Research Conference, January 3-6, 2000, Vancouver, British Columbia, Canada.
  34. Hou, Z.* (50%), and Adanur, S. (50%), “Direct Use of Waste PVC Coated Fabrics to Reinforce Composites”, Proceedings of the 1999 International Mechanical Engineering Congress & Exposition, 99-IMECE/TEX-5, November 14-19, 99, Nashville, Tennessee.
  35. Adanur, S. (50%), and Xu, B.*, (50%), “Process Development of Microwave Preheating and Infrared Post Curing of Braided Polymer/Epoxy Composites”, Proceedings of the 1999 National Science Foundation (NSF) Design and Manufacturing Grantees Conference, January 5-8, 1999, Long Beach, CA.
  36. Adanur, S., (50%) and Xu, B.*, (50%), “Influence of Microwave Fast-Preheating on Epoxy Resin Chemorheology Properties”, American Society of Mechanical Engineers (ASME) Congress, Textile Engineering Division, November 1998, Anaheim, CA.
  37. Adanur, S. (50%), and Liao, T. (50%), "3D Modeling of Textile Composite Preforms", Proceedings of the ICCE/5 Fifth International Conference on Composites Engineering, July 5-11, 1998, Las Vegas, NV.
  38. Adanur, S. (50%), and Xu, B.* (50%), "Impact Resistance of Microwave Cured Glass/Epoxy Composites", Proceedings of the Second International Conference on Composite Science and Technology, ICCST/2, June 9-11, 1998, Durban, South Africa.
  39. Mallick, S. B*. (50%), Elton, D. J. (25%), and Adanur, S. (25%), "A New Approach in Modeling of Soil-Geotextile Interface Behavior in Pullout Tests", Proceedings of the Sixth International Conference on Geosynthetics, March 25-29, 1998, Atlanta,
  40. Adanur, S.(50%), and Xu, B.* (50%), "Fast, Net Shape Manufacturing of Textile Composites", Proceedings of the Design and Manufacturing Grantees Conference, National Science Foundation, Monterrey, Mexico, January 1998.
  41. Adanur, S. (50%), Hou, Z. * (50%), "Recycling and Reuse of PVC Coated Polyester Fabric", TCL7, Proceedings of the 7th International Conference on Textile Coating and Laminating, Charlotte, NC, November 1997.
  42. Adanur, S. (50%), and Xu, B.* (50%), "Characteristics of Microwave-Cured Braided Glass/Epoxy Composites", Proceedings of the Composites at Lake Louise, CALL '97, Lake Louise, Canada, October 1997.
  43. Adanur, S. (50%), Arumugam, Y. S.* (5%), and Xu, B.* (45%), "Fast Net Shape Manufacturing of Braided Textile Composite Structures", Proceedings of the Fourth International Conference on Composites Engineering (ICCE/4), Hawaii, July 1997.
  44. Adanur, S. (50%), and Sreekanthreddy, G.* (50%), "Compression Behavior of 3D Reinforced Glass/Epoxy Laminar Composite Profiles", ICAPC-97, Proceedings of the International Conference on Advanced Polymer Composites, Materials, Processing and Applications, Beijing University of Aeronautics and Astronautics, Beijing, China, June 1997.
  45. Basu Mallick, S.* (40%), Elton, D. J. (30%), and Adanur, S. (30%), "An Experimental Characterization of Soil-Woven Geotextile Interface in Large Box Pullout Tests", Proceedings of the Geosynthetics '97, Long Beach, CA, March 1997, pp. 927-940.
  46. Adanur, S., "Manufacturing of Industrial Textiles", 10 pages, Proceedings of the NSF sponsored Symposium, December 1996, Alexandria, Egypt.
  47. Adanur, S. (40%), Mallick, S.*(30%) , and Zhai, H.*(30%), "Analysis of Geotextile-Soil Interaction in Pull-Out Tests", Proceedings of the IS Kyushu '96, International Symposium on Earth Reinforcement, Fukuoka, Japan, November 1996.
  48. Warren, A.* (50%), El-Halwagi, M. (25%) and Adanur, S. (25%), "Design of a New Process for Converting Textile Solid Waste into Transportation Fuel", Proceedings of the First Trabzon International Energy and Environment Symposium, Karadeniz Technical University, Trabzon, Turkey, July 1996.
  49. Adanur, S. (50%), and Gongalareddy, S.*(50%), "Compressive Properties of Stitched Woven Fiberglass Fabric Reinforced Composite Sections for Civil Engineering Applications", ICCE/3, Proceedings of the Third International Conference on Composites Engineering, New Orleans, LA, July 1996.
  50. Adanur, S., (80%) and Tam, C. A*. (20%), "On-machine Stitching of 3-D Laminate Structures for Composites", Proceedings of the 2nd International Conference on Composites Engineering (ICCE/2), New Orleans, LA, August 1995.
  51. Wang, S.* (40%), Adanur, S. (40%) and Jang, B. Z. (20%), "Thermo-Mechanical Behavior of Fiber/Filler Reinforced Phenolic Matrix Composites”, Proceedings of the 2nd International Conference on Composites Engineering (ICCE/2), New Orleans, LA, August 1995.
  52. Wang, S.* (40%), Adanur, S (40%). and Jang, B. Z. (20%), "Mechanical Behavior of Fiber/Filler Reinforced Phenolic Matrix Composites", Proceedings of the 2nd International Conference on Composites Engineering (ICCE/2), New Orleans, LA, August 1995.
  53. Adanur, S. (50%), Mallick, S. B.* (25%), and Zhai, H.* (25%), "Design and Characterization of Geotextiles for High Performance Applications", Proceedings of the Hi-Tech Textiles Exhibition and Conference, Textile World and INDA, Greenville, SC, July 1995.
  54. Mallick, S. B.* (40%)., and Zhai, H.* (40%), "A Laboratory Study on Pull-out Performance of Woven Geotextiles", Geosynthetics '95 Conference Proceedings, Nashville, TN, February 1995. This student paper, directed by Dr. Adanur (10%) and Dr. Elton (10%), was one of the 6 papers accepted for the conference.
  55. Adanur, S. (60%), and Tsao, Y. P.* (40%), "Stitch Bonded Textile Structural Composites", SAMPE, Proceedings of the 26th International Technical Conference, Atlanta, GA, October 94.
  56. Kozey, K.* (40%), Kumar, S. (20%), (Ga Tech), Adanur, S. (20%), and Mohamed, M. H. (20%), (NC State), "Compressive Failure Mechanisms in Woven and Laminate Glass/Epoxy Composites", SAMPE, Proceedings of the 26th International Technical Conference, Atlanta, GA, October 94.
  57. Adanur, S. (60%), Tsao, Y. P.* (20%), and Tam, C. W.* (20%), "Improving Fracture Resistance in Laminar Textile Composites", Proceedings of International Conference on Composite Engineering, ICCE/1, New Orleans, LA, August 1994.
  58. Adanur, S., "Design and Structure of Fabrics for Papermaking", 3rd Annual International Hi-Tech Textiles Conference, Textile World and INDA, Greenville, SC, June 1994.
  59. Adanur, S., (50%) and Walker, R. P. (50%), "Yarn Preparation for Weaving in the Future", Proceedings of the 33rd Annual Textile Slashing Short Course, Auburn University, AL, September 1993.
  60. Adanur, S., "Effects of Forming Fabric Design on Paper Properties", Second International Hi-Tech Textiles Exhibition and Conference Proceedings, Greenville, SC, July 1993.

 

Last Updated: Sep 01, 2023
Samuel Ginn College of EngineeringUp to Department of Mechanical Engineering
Dr. Sabit Adanur
Professional ExperienceTeachingResearchProject HighlightsBooksPublicationsTechnical PresentationsInventionsService-ExtensionAwards