College of Engineering / Department of Mechanical Engineering / Dr. Sabit Adanur / Technical Presentations

Conference Presentations

Technical Presentations Made

  • Adanur, Latest Developments in Paper Machine Clothing as it Relates to Papermaking, TAPPIcon 2023, Technical Association of the Pulp and Paper Industry, April 22-26, 2023, Atlanta, GA.
  • Alby, L., Jayswal, A., and Adanur, S., Novel Medical Facemasks for Covid-19, The Fiber Society 2022 Fall Meeting and Technical Conference, NC State University, Raleigh, NC, 19-21 October 2022.
  • Jayswal, A., and Adanur, S., Computational Analysis of 3D Printed Woven Fabrics, The Fiber Society 2022 Fall Meeting and Technical Conference, NC State University, Raleigh, NC, 19-21 October 2022.
  • Jayswal, A., and Adanur, S., Design, fabrication, and testing of novel 3D printed facemasks, CPAC Summer seminar series, Auburn University, 20 July 2021.
  • Jayswal, A., and Adanur, S., Effect of Heat Treatment on the Crystallinity and Mechanical Properties of FDM 3D Printed Twill Fabric Structures, AU Research 2021 Student Symposium, Auburn University, 30 March 2021.
  • Adanur, S., and Jayswal, A., 3D Printing of Fabric-like Structures, TechTextil North America, 19 November 2020 (Webex presentation).
  • LaBombard, K., and Adanur, S., “Manufacturing of Nanoparticle Reinforced Materials Through Electrospinning”, The Fiber Society 2017 Fall Conference, Athens, GA, Nov. 8-10, 2017.
  • Shen, Y., Broughton, R., Beale, D., Foster, W., Branscomb, D., and Adanur, S., “Failure Analysis of Open-Architecture Composite Structures Under Compression”, The Fiber Society 2015 Fall Meeting and Technical Conference, October 28-30, 2015, College of Textiles, North Carolina State University, Raleigh, NC.
  • Shen, Y., Sangars, U., Adanur, S., Broughton, R., Beale, D., and Foster, B., “Failure Analysis of Micro-joints in Open-architecture Composite Structures (O-ACS)”, TEXCOMP-12, 12th International Conference on Textile Composites, NC State University, College of Textiles, Raleigh, NC, USA, May 26-29, 2015.
  • Shen, Y., Adanur, S., Broughton, R., Beale, D., and Foster, B., “Buckling Analysis of Open-Architecture Composite Structures (O-ACS)”, This is Research: Student Symposium 2015, Auburn University, 13 April 2015.
  • Adanur, S., “Application of Fluid Dynamics in PFEN”, presentation given to AU Fluid Dynamics Working Group, 5 March 2015, Auburn, AL (Fluid Dynamics Working Group was established as a result of the SGCOE Interdisciplinary Faculty Research Colloquium).
  • Shen, Y., and Adanur, S., “Modeling of tensile properties of multi-layer fabrics by multi-scale finite element method”, Auburn University Graduate Scholar Forum, 5 March 2014.
  • Shen, Y., and Adanur, S., “A Biaxial Braiding Tubular Structure Based on Helical Auxetic Yarns”, The Fiber Society International Symposium on Fibers Interfacing the World, Oct. 23-25, 2013, Clemson, SC. 
  • Adanur, S., and Liu, W, “Desulfurization Properties of Activated Carbon Fibers in Dry Conditions”, International Istanbul Textile Congress 2013, New Materials, May 30-31, 2013, Istanbul, Turkey.
  • Shen, Y., Adanur, S., Meir, A. and Cao, Y., “Finite Element Analysis of Uniaxial Tension of Polyester Monofilament Woven Fabric”, Auburn Research Week, 3 April 2013.
  • Adanur, S., and Broughton, R., “Recovery and Reuse of Waste PVC Coated PET Fabrics”, The 4rd International R&D Project Brokerage Event, Bursa, Turkey, Feb. 2-3, 2012 (presented as poster as well).
  • Adanur, S., “PVA Nanofiber Based Membrane for Proton Exchange Membrane Fuel Cells”, The 4rd International R&D Project Brokerage Event, Bursa, Turkey, Feb. 2-3, 2012 (presented as poster as well).
  • Selver, E., and Adanur, S., Properties of Nanoclay Added Composite Polypropylene Monofilaments Using Twin and Single Screw Extruders, Fiber Society International Symposium on New Frontiers in Fiber Materials Science, Oct. 11-13, 2011, Charleston, SC.
  • Adanur, S., A Novel Filling Insertion System for Weaving, The 3rd International R&D Project Brokerage Event, Bursa, Turkey, Feb. 10-11, 2011.
  • Adanur, S., Conceptual Design and Characterization of 3D Interlaced Fibrous Structures, The 3rd International R&D Project Brokerage Event, Bursa, Turkey, Feb. 10-11, 2011.
  • Zheng, H., and Adanur, S., “Synthesis and Characterization of Sulfonated Polyimide Based Membrane for Proton Exchange Membrane Fuel Cell Applications”, Alabama Composites Conference, Aug. 24-26, 2010, Birmingham, AL (presented as poster as well).
  • Liu, W., and Adanur, S., “Activated Carbon Fiber Filter Media in Proton Exchange Membrane Fuel Cells for Automotives”, Techtextil North America Symposium, May 18-20, 2010, Georgia World Congress Center, Atlanta, GA.
  • Adanur, S., and Selver, E., “Processing and Properties of nanoclay reinforced polypropylene monofilaments”, The 4th International Technical Textiles Congress, 16-18 May, 2010, Istanbul, Turkey.
  • Adanur, S., and Gocek, I., “Nanoclay and Compatibilizer Effects on Polypropylene Cast Film Processing and Properties”, Fiber Society Spring 2010 International Conference, May 12-14, 2010, Bursa, Turkey.
  • Keskin, R., and Adanur, S., “Improving Toughness of Polypropylene Injection Molded Parts with Thermoplastic Elastomer Materials”, The Fiber Society 2009 Fall Meeting and Technical Conference, The University of Georgia, Athens, GA, Oct. 28-30, 2009.
  • Gocek, I., and Adanur, S., “Effect of Processing Parameters on Polypropylene Film Properties”, The Fiber Society 2009 Fall Meeting and Technical Conference, The University of Georgia, Athens, GA, Oct. 28-30, 2009.
  • Selver, E., and Adanur, S., “Processing and Property Relationship of Nanoclay Reinforced Polypropylene Monofilaments”, The Fiber Society 2009 Fall Meeting and Technical Conference, The University of Georgia, Athens, GA, Oct. 28-30, 2009.
  • Liu, W., and Adanur, S.,  “Application of Activated Carbon Fibers in Fuel Cell Cathode Filter Media”, The Fiber Society 2009 Spring Conference: International Conference on Fibrous Materials 2009, Shanghai, China, May 27-29, 2009.
  • Adanur, S., Nanotechnology Applications in Textiles, The 6th Textile Congress, Suleyman Demirel University, Isparta, Turkey, May 1-3, 2009.
  • Liu, W., and Adanur, S., “Activated carbon fiber filter media for PEM fuel cell cathode”, AU Annual Research Forum, 10 March 2009.
  • Adanur, S., “Nanotechnologies are Coming Your Way”, Industrial Fabrics Association International (IFAI) Expo ’08, October 21-23, 2008, Charlotte, NC (invited presentation).
  • Adanur, S., and Isikel, L., “Manufacturing of Carbon Nonwoven Gas Diffusion Layers with Wet-Laying Process”, Techtextil North America Symposium, April 1-3, 2008, Atlanta, GA.
  • Adanur, S., Gumusel., L. and Bas, H., “A Novel 3D Woven-Knit Hybrid Fabric for Composites”, Techtextil North America Symposium, April 1-3, 2008, Atlanta, GA.
  • Adanur, S., and Isikel, L., “Nonwoven Fabrics for Gas Diffusion Layers in Polymer
    Electrolyte Membrane Fuel Cells”, Conference on Structural Composites Applications in Defense, Infrastructure, Transportation, Corrosion-Prevention and Power Industry, March 4-6, 2008, Birmingham, AL.
  • Auad, M. L. , Mosiewicki, M. A., Richarson, T.,  Adanur, S.,  Aranguren, M. I. , Marcovich,  N. E., Medeiros, E. S., and Mattoso, L. H. C., “Shape Memory Polyurethanes Reinforced with Electrically Conductive Cellulose Crystals” , COMAT 2007, December, 2007, Brazil.
  • Ascioglu, B., and Adanur, S., “Nanofiber Coating and Nanofiber Based Continuous Yarn Manufacturing” (including proceedings), 2nd Textile Technology and Textile Machinery Congress, 19-20 October, 2007, Gaziantep, Turkey.
  • Adanur, S., “Innovation in Textiles, Nanotechnology Practices and Technical Textiles”, 1st International Textile and Apparel Summit, June 2-3, 2007, Denizli, Turkey.
  • Adanur, S., and Isikel, L., “Design and Characterization of Nonwoven Fabrics for Gas Diffusion Layer in Polymer Electrolyte Membrane Fuel Cells”, May 23, 20007, Karadeniz Technical University, Trabzon, Turkey.
  • Ascioglu, B., and Adanur, S., “Hexagonal Unit Cell Model for Thermal Conductivity of Nano-Micro Fiber Composites”, ULIBTK ’07, The 16th Heat Transfer Congress, May 30- June 2, 2007, Erciyes University, Kayseri, Turkey.
  • Isikel, L., and Adanur, S., “Manufacturing of Gas Diffusion Layers for Polymer Electrolyte Membrane Fuel Cell”, Auburn University 17th Annual GSC Research Forum, 7 March 2007, Foy Union, AU.
  • Adanur, S., and Irsale, S., “Textile Stent Prototyping and Modeling”, IFAI Expo 2006 Medical Textiles Symposium, Atlanta, Oct. 31, 2006.
  • Adanur, S., “Wide World of Industrial Textiles”, presentation given to the teachers of the Istanbul Textile Vocational School, June 22, 2006, Istanbul, Turkey.
  • Adanur, S., “Dynamics of Air-Jet Weaving”, The First Istanbul International Textile and Textile Machinery Congress, June 1-2, 2006, Istanbul, Turkey.
  • Adanur, S., Aglan, H., Gumusel, L., and Bas, H., “Textile Machinery and Processes for Composite Preform Manufacturing”, The First Istanbul International Textile and Textile Machinery Congress, June 1-2, 2006, Istanbul, Turkey.
  • Adanur, S., Isikel, L., and Abdelhady, F., “Coated and Laminated Fabrics for Fuel Cells”, TechTextil Symposium North America, March 28-30, 2006, Atlanta, GA.
  • Adanur, S., Schwartz, P., Broughton, R., S., Thomas, H., Byrne, M., and Hong, J. W., “Novel Polymeric Materials and Structures for Biomedical/Health Applications”, presentation given to the AU internal committee for NSF Major Research Instrumentation (MRI) Program, 9 Dec. 2005.
  • Adanur, S., “Application of Industrial Textiles”, Seminar given to ITAS 8960 Class, 8 Sept. 2005.
  • Adanur, S., “High Tech Textiles”, Bossa, Adana, Turkey, 18 July 2005.
  • Adanur, S., “Coated and Laminated Fabrics for Fuel Cells”, 2nd International Technical Textiles Congress, Istanbul, Turkey, 13-15 July 2005.
  • Adanur, S., and Ascioglu, B., “Challenges and Opportunities in Nano Fiber Manufacturing and Applications”, 2nd International Technical Textiles Congress, Istanbul, Turkey, 13-15 July 2005.
  • Adanur, S., “Higher Education in the U.S”, Suleyman Demirel University, Isparta, Turkey, 8 July 2005.
  • Adanur, S., “High Tech Textiles”, Suleyman Demirel University, Isparta, Turkey, 8 July 2005.
  • Adanur, S., “High Tech Textiles”, Denizli Chamber of Commerce, Turkey, 7 July 2005.
  • Adanur, S., “High Tech Textiles”, Pamukkale University, Denizli, Turkey, 6 July 2005.
  • Adanur, S., “Higher Education in the U.S”, Karadeniz Technical University, Trabzon, Turkey, 30 June 2005.
  • Irsale, S., and Adanur, S., “Exporing Textile Stents: Prototyping and Modeling”, Fiber Society Spring 2005 Conference, May 25-27, 2005, St. Gallen, Switzerland.
  • Adanur, S., ”High Performance and Nano Fibers”, Twtichell Corporation, Dothan, AL, Sept. 2, 2004.
  • Adanur, S., “Dynamic Analysis of Air-Jet Filling Insertion: Effect of Timing on Air and Yarn Velocity”, SECTAM XXII, 22nd Southeastern Conference on Theoretical and Applied Mechanics, August 15-17, 2004, Tuskegee, AL.
  • Ascioglu, B., and Adanur, S., “Heat Transfer Behavior of Particle Reinforced Nanofibers”, SECTAM XXII, 22nd Southeastern Conference on Theoretical and Applied Mechanics, August 15-17, 2004, Tuskegee, AL.
  • Irsale, S., and Adanur, S., “Compression Force Modeling of Braided Textile Stents”, SECTAM XXII, 22nd Southeastern Conference on Theoretical and Applied Mechanics, August 15-17, 2004, Tuskegee, AL.
  • Ascioglu, B., and Adanur, S., “Modeling of Thermal Conductivity in Nanofiber Composites”, ICCE-11, 11th Annual International Conference on Composites/Nano Engineering, Hilton Head, SC, August 8-14, 2004.
  • Adanur, S., and Ascioglu, B., “Processing Characterization of PVA Nanofibers in Electrospinning”, ICCE-11, 11th Annual International Conference on Composites/Nano Engineering, Hilton Head, SC, August 8-14, 2004.
  • Adanur, S., “Geotextiles”, Unsa, Inc., Istanbul, Turkey, July 19, 2004.
  • Adanur, S., and Vakalapudi, J. S., “Fabric Design and Analysis System in 3D Virtual Reality”, The 2nd International Istanbul Textile Congress, April 22-24, 2004, Istanbul, Turkey.
  • Irsale, S., and Adanur, S., “Monofilament Yarns in Braided Vascular Prostheses”, TechTextil Symposium North America, Atlanta, GA, March 30-April 1, 2004.
  • Ascioglu, B., Adanur, S., Patra, P. K., Inan, G., Kim, Y., and Warner, S., “Heat Transfer Modeling in Nanofiber Reinforced Composites”, ICCE-10, New Orleans, July 20-26, 2003.
  • Inan, G., Patra, P. K., Warner, S. B., Kim, Y. K., Ascioglu, B., and  Adanur, S.,  “In-Situ Polymerized Flame Retardant Nanocomposites”, ICCE-10, New Orleans, July 20-26, 2003.
  • Onal, L., and Adanur, S., “A Novel 3D Structure, 3D Hybrid Woven/Knitted Fabric”, Proceedings of the The Fiber Society 2003 Spring Symposium, “Advanced Flexible Materials and Structures: Engineering with Fibers”, June 30-July 2, 2003, Loughborough, England .
  • Adanur, S., “Wide World of Industrial Textiles”, June 19, 2003, Marmara University, Istanbul, Turkey,
  • Sathendra, V., and Adanur, S., “Fabric Design and Analysis System in 3D Virtual Reality”, Auburn University Annual Research Forum, Auburn, AL, 20 March 2003.
  • Adanur, S., “Wide World of Industrial Textiles”, Dong Hua University, Shanghai, China, 26 Sept. 2002.
  • Adanur, S., and Onal, L., “Experimental Analysis of Textile Composites”, TechTextil North America Symposium, Atlanta, GA. April 9-11, 2002, April 9-11, 2002.
  • Elton, D. J., Howie, D. L., and Adanur, S., “Bubblepoint Testing of Nonwoven Geotextiles”, 37th Symposium on Engineering Geology and Geotechnical Engineering, Boise, Idaho, March 27-29, 2002.
  • Adanur, S., and Turel, T., “Mechanics of Air-Jet Filling Insertion”, 2001 ASME International Mechanical Engineering Congress & Exposition, New York, NY, Nov. 14, 2001.
  • Adanur, S.,, “Role of Technical Fabrics in Papermaking: An Overview”, Techtextil Symposium North America, March 13-15, 2001, Atlanta, Georgia.
  • Adanur, S., and Onal, L., “Effects of Production Variables on Stress-Strain Behavior of Glass/Epoxy Textile Composites in Compression Molding”, The 2000 American Society of Mechanical Engineers (ASME) Congress & Exposition, Orlando, FL, Nov. 5-10, 2000.
  • Adanur, S., and Onal, L., “Impact Failure Analysis of Glass/Epoxy Textile Composites”, The 2000 American Society of Mechanical Engineers (ASME) Congress & Exposition, Orlando, FL, Nov. 5-10, 2000.
  • Adanur, S., and Orak, H., “Textile Composites”, DOE/TACOM Army 21st Century Truck Program, Auburn University, Auburn, Al. 3 August, 2000.
  • Adanur, S., Xu, B., and Orak, H., “Braided Composite Automotive Chassis Frame”, ICCE/7 Seventh International Conference on Composites Engineering, July 2-8, 2000, Denver, CO.
  • Elton, D. J., and Adanur, S., “Varying Pore Sizes in Hydroentangled Geotextiles”, Techtextil North America International Trade Fair for Technical Textiles and Nonwovens”, March 22-24, 2000, Atlanta, GA.
  • Adanur, S., Bakhtiyarov, S., and  Beale, D., “Characterization of Air-Yarn Interface in Air-Jet Weaving”, National Textile Center Annual Forum, January 27-29, 2000, Myrtle Beach, SC.
  • Hou, Z., and Adanur, S., “Direct Use of Waste PVC Coated Fabrics to Reinforce Composites”, 1999 International Mechanical Engineering Congress & Exposition, November 17, 1999, Nashville, Tennessee.
  • Bakhtiyarov, S., and Adanur, S., “Airflow over Wavy Yarn in Air-jet Filling Insertion”,  Second International Symposium on Mathematical & Computational Applications, Baku, Azerbaijan, September 1-3, 1999.
  • Adanur, S., and Bakhtiyarov, S., “Numerical Study of Collision Efficiency of Dust Particles”, Second International Symposium on Mathematical & Computational Applications, Baku,  Azerbaijan, September 1-3, 1999.
  • Yuksekkaya, M. E., Thomas, H., and Adanur, S.,, “Analysis of Elastic Deformation of Braided Tubular Structures for Medical Applications, The Fiber Society 58th Annual General Conference, Symposium on Textile and Polymer Based Biomaterials, Philadelphia, PA, May 3-4, 1999.
  • Adanur, S., Gowayed, Y., and Thomas, H., "On-Line Measurement of  Fabric Properties ", National Textile Center Annual Forum, January 28-30, 1999, Myrtle Beach, SC.
  • Adanur, S., and Xu, B., “Influence of Microwave Fast Preheating on Epoxy Resin Chemorheology Properties”, The 1998 International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, CA.
  • Adanur, S., and Liao, T., "3D Modeling of Textile Composite Preforms", ICCE/5 Fifth International Conference on Composites Engineering, July 5-11, 1998, Las Vegas, NV.
  • Adanur, S., and Xu, B., "Impact Resistance of Microwave Cured Glass/Epoxy Composites", ICCST/2, Second International Conference on Composite Science and Technology, Durban, South Africa, June 9-11, 1998.
  • Mallick, S. B., Elton, D. J., and Adanur, S., "A New Approach in Modeling of Soil-Geotextile Interface Behavior in Pullout Tests", Sixth International Conference on Geosynthetics, March 25-29, 1998, Atlanta, GA.
  • Adanur, S., and Hou, Z., "Recycling and Reuse of PVC Coated Polyester Fabric", TCL7, The 7th International Conference on Textile Coating and Laminating, Nov. 17-18, 1997, Charlotte, NC. 
  • Adanur, S., and Xu, B. , "Characteristics of Microwave-Cured Braided Glass/Epoxy Composites", Composites at Lake Louise, CALL '97, October 12-17, 1997, Canada.
  • Adanur, S., Arumugam, Y. S., and Xu, B., "Fast Net Shape Manufacturing of Braided Textile Structures", ICCE/4, Fourth International Conference on Composites Engineering, July 6-12, 1997, Big Island of Hawaii.
  • Adanur, S., and Sreekanthreddy, G., "Compression Behavior of 3D Reinforced Glass/Epoxy Laminar Composite Profiles", ICAPC-97, International Conference on Advanced Polymer Composites, Materials, Processing and Applications, Beijing University of Aeronautics and Astronautics, Beijing, China, June 3-5, 1997.
  • Adanur, S., “Geotextiles: Design and Applications in Alabama”, Presentation to Alabama Congressional Delegation , May 9, 1997.
  • Basu Mallick, S., Elton, D. J., and Adanur, S., "An Experimental Characterization of Soil-Woven Geotextile Interface in Large Box Pullout Tests", Geosynthetics '97, March 10-13, 1997, Long Beach, CA.
  • Yuksekkaya, M., Thomas, H., Adanur, S., Chaikof, E., "Polymeric Braided Stents for Medical Applications", 1996 ASME International Mechanical Engineering Congress and Exposition, Nov. 17-22, 1996, Atlanta, GA.
  • Ghosh, T., and Adanur, S., Design and Characterization of Geotextiles for High Performance Applications, Nonwovens Cooperative Research Center, Semi-Annual Meeting, Year 5, Nov. 20, 1996, Raleigh, NC.
  • Adanur, S., Mallick, S., and Zhai, H., "Analysis of Geotextile-Soil Interaction in Pull-Out Tests", IS Kyushu '96, International Symposium on Earth Reinforcement, November 12-14, 1996, Fukuoka, Japan.
  • Warren, A., El-Halwagi, M. and Adanur, S., "Design of a New Process for Converting Textile Solid Waste into Transportation Fuel", TIEES-96, The First Trabzon International Energy and Environment Symposium, July 29-31, 1996, Karadeniz Technical University, Trabzon, Turkey.
  • Adanur, S., and Gongalareddy, S., "Compressive Properties of Stitched Woven Fiberglass Fabric Reinforced Composite Sections for Civil Engineering Applications", ICCE/3, Third International Conference on Composites Engineering, July 21-26, 1996, New Orleans, LA.
  • Adanur, S., Design and Characterization of Geotextiles for High Performance Applications, Nonwovens Cooperative Research Center, 5th Annual Meeting, May 29, 1996, Raleigh, NC.
  • Adanur, S., "Manufacturing of Industrial Textiles: Requirements and Opportunities", Sulzer-Ruti Technical Fabric Symposium, February 21-23, 1996, Spartanburg, SC.
  • Adanur, S., "State of the Art in Technical Textiles", Discover EXPO '95, Industrial Fabric and Equipment Exposition, Industrial Fabrics Association International, Charlotte, NC, Oct. 12-14, 1995.
  • Wang, S., Adanur, S. and Jang, B. Z., "Thermo-Mechanical Behavior of Fiber/Filler Reinforced Phenolic Matrix Composites",  2nd International Conference on Composites Engineering (ICCE/2), August 21-24, 1995, New Orleans, LA.
  • Adanur, S.,  and Tam, C. A., "On-machine Stitching of 3-D Laminate Structures for Composites", 2nd International Conference on Composites Engineering (ICCE/2), August 21-24, 1995, New Orleans, LA.
  • Wang, S., Adanur, S. and Jang, B. Z., "Mechanical Behavior of Fiber/Filler Reinforced Phenolic Matrix Composites", Proceedings of the 2nd International Conference on Composites Engineering (ICCE/2), August 21-24, 1995, New Orleans, LA.
  • Adanur, S., Mallick, S. B., and Zhai, H., "Design and Characterization of Geotextiles for High Performance Applications", Hi-Tech Textiles Exhibition and Conference, July 24-26, 1995, Greenville, SC.
  • Broughton, R. M., Bakhtiyarov, S. I., Brady, P., and Adanur, S., "Initial Design of Nonwoven Fabrics for Air Filtration", Hi-Tech Textiles Exhibition and Conference, July 24-26, 1995, Greenville, SC.
  • Adanur, S., and Tsao, Y. P., "Stitch Bonded Textile Structural Composites", The 26th International Technical Conference, SAMPE, October 24-27, 94, Atlanta, GA.
  • Adanur, S., Tsao, Y. P., and Tam, C. W., "Improving Fracture Resistance in Laminar Textile Composites", First International Conference on Composites Engineering, August 28-31, 1994, New Orleans, LA.
  • Adanur, S., "Design and Structure of Fabrics for Papermaking", Third International Hi-Tech Textiles Exhibition & Conference, June 21-22, 1994, Greenville, SC.
  • Adanur, S., and Walker, B., "Yarn Preparation for Weaving in the Future (Yarn Preparation for the Second Loom)", 33rd Annual Textile Slashing Short Course, September 22, 1993, Auburn University, AL.
  • Adanur, S., "Paper Machine Clothing", Istanbul Technical University, Textile Engineering Department, August 4, 1993.
  • Adanur, S., "Effects of Forming Fabric Design on Paper Properties", 2nd International Hi-Tech Textiles Conference, July 21, 1993, Greenville, SC.
  • ElMogahzy, Y., Gowayed, Y. and Adanur, S., "Mechanical Characterization of Geotextiles/Soil Interaction", The Fiber Society Spring Meeting, May 1993, Raleigh, NC.
  • Adanur, S., "Design and Applications of Forming Fabrics in Papermaking", North Carolina State University, College of Textiles, Fiber, Polymer and Textile Seminar Program, March 17, 1993, Raleigh, NC. 

Poster Sessions Presented 

  1. Jayswal and S. Adanur, Additive manufacturing of polymeric flexible structures, Graduate Engineering Research Showcase (GERS), March 23, 2023, Huntsville, AL.
  2. Jayswal, A., and Adanur, S., Manufacturing and Characterization of Composite Filaments for 3D Printing of Fabrics, The Fiber Society 2022 Fall Meeting and Technical Conference, NC State University, Raleigh, NC, 19-21 October 2022.
  3. Alby L., and Adanur, S., Novel Reusable Textile Facemask to Prevent Spread of COVID-19, AU SGCoE, Graduate Engineering Research Showcase, Huntsville, AL, March 29, 2022.
  4. Jayswal, A., and Adanur, S., Characterization of Composite Filaments for 3D Printing of Fabrics, AU SGCoE, Graduate Engineering Research Showcase, Huntsville, AL, March 29, 2022.
  5. Alby, L., and Adanur, S., Design, Fabrication, and Testing of Novel Medical Facemasks to Prevent Covid-19, 2021 Graduate Engineering Research Showcase, 28 October 2021.
  6. Jayswal, A. and Adanur, S., Characterization of PLA/TPU Composite Filaments Manufactured for 3D Printing with FDM, Poster presentation, 2021 Graduate Engineering Research Showcase, 28 October 2021.
  7. Jayswal, A., and Adanur, S., Additive Manufacturing of Fabric-like Structures, 2020 Virtual Student Research Symposium, April 2020.
  8. Adanur, S., “Air-Jet Filling Insertion System”, Mechanical Engineering Undergraduate Research Information Poster Session, 10 October 2017, Wiggins Hall, Auburn University.
  9. Adanur, S., “Air-Jet Filling Insertion System”, Mechanical Engineering Undergraduate Research Information Poster Session, 1 September 2016, Wiggins Hall, Auburn University.
  10. Adanur, S., Shen, Y., “Braided Structures Based on Helical Auxetic Yarns”, Uludag Textile Exporters Association UTIB International R&D Brokerage Event, Bursa, Turkey, May 27-29, 2015.
  11. Shen, Y., Adanur, S., Broughton, R., Beale, D. and Foster, B., “Failure Analysis of Micro-joints in Open-architecture Composites Structures (O-ACS)”, Fall 2014 Graduate Engineering Research Showcase, Auburn University, Oct. 23, 2014.
  12. Shen, Y., and Adanur, S., “Finite Element Analysis of Monofilament Woven Fabrics under Uniaxial Tension”, 2nd Annual Graduate Engineering Research Show Case, Auburn University, Oct. 24, 2013.
  13. Adanur, S., “A Novel Braided Structure to Increase Compression and Torsion Resistance of Composites”, The 5th International R&D Project Brokerage Event, Bursa, Turkey, 4-5 April 2013.
  14. Adanur, S., “Prevention of PEM Fuel Cell Poisoning via Adsorption using Activated Carbon Fiber Based Cathode Filters”, The 5th International R&D Project Brokerage Event, Bursa, Turkey, 4-5 April 2013.
  15. Adanur, S., “Health and Safety Effects of Nanoparticles Embedded in Textile Materials”, The 5th International R&D Project Brokerage Event, Bursa, Turkey, 4-5 April 2013.
  16. Adanur, S., and Broughton, R., “Recovery and Reuse of Waste PVC Coated PET Fabrics”, The 4th International R&D Project Brokerage Event, Bursa, Turkey, Feb. 2-3, 2012.
  17. Adanur, S., “PVA Nanofiber Based Membrane for Proton Exchange Membrane Fuel Cells”, The 4th International R&D Project Brokerage Event, Bursa, Turkey, Feb. 2-3, 2012.
  18. Adanur, S., A Novel Filling Insertion System for Weaving, The 3rd International R&D Project Brokerage Event, Bursa, Turkey, Feb. 10-11, 2011.
  19. Adanur, S., Conceptual Design and Characterization of 3D Interlaced Fibrous Structures, The 3rd International R&D Project Brokerage Event, Bursa, Turkey, Feb. 10-11, 2011.
  20. Liu, W., and Adanur, S., “Activated carbon fiber filter media for proton exchange membrane fuel cell cathode”, The Fiber Society 2009 Spring Conference: International Conference on Fibrous Materials 2009, Shanghai, China, May 27-29, 2009 (chosen as one of the 4 best posters).
  21. Liu, W., and Adanur, S., “Activated carbon fiber filter media for proton exchange membrane fuel cell cathode Fiber Society Meeting, Shanghai, China, June 2009. Won the best poster award.
  22. Adanur, S., and Irsale, “Development of Drug Eluting Textile Stents”, NTC Forum, June 3, 2008, Greenville,C.
  23. Lee, S., Liu, W., and Adanur, S., “Nonwoven Fibrous Structures from Electrospun Nanofibers”, NSF Research Experience for Undergraduates REU Program in Micro/Nano-Structured Materials, Therapeutics and Devices Poster Session, AU Saugahatchee Club, July 26, 2007.
  24. Liu, W., and Adanur, S., “Characterization of PVA and PAN Electrospun Nonwoven Fibers”, Auburn University 17th Annual GSC Research Forum, 7 March 2007, Foy Union, AU.
  25. Isikel, L., Adanur, S., Tatarchuk, B., Isikel, L., (Auburn University), Warner, S., Fan, Q., and Narvekar, V., “Coated and Laminated Fabrics for Fuel Cells”, NTC Forum, Feb. 25-27, 2007, Hilton Head, S.C.
  26. Thomas, H., Riggs, L., Elton, D., and Adanur, S., “Reinforcement Fabrics with Electronic Antenna Capabilities”, NTC Forum, Feb. 25-27, 2007, Hilton Head, S.C.
  27. Yacoob, S., Isikel, L., and Adanur, S., “Nonwoven Fabric Manufacturing and Testing Using Electrospinning”, NSF Research Experience for Undergraduates (REU) Program, Moores Mill Club, Auburn, 4 August 2006.
  28. Adanur, S., Isikel, L., and Abdelhady, F., “Coated and Laminated Fabrics for Fuel Cells”, TechTextil Symposium North America, March 28-30, 2006, Atlanta,
  29. Adanur, S., Choe, B., Fan, Q., and Warner, S., “Coated and Laminated Fabrics for Fuel Cells”, National Textile Center 14th Annual Forum, February 19-21, 2006, Hilton Head, SC.
  30. Adanur, S., Swagat, I., Warner, S., and Chaikof, E., “Textile Prostheses for Vascular Applications”, National Textile Center 14th Annual Forum, February 19-21, 2006, Hilton Head, SC.
  31. Adanur, S., Choe, B., Fan, Q., and Warner, S., “Coated and Laminated Fabrics for Fuel Cells”, National Textile Center 13th Annual Forum, March 20-22, 2005, Raleigh, NC.
  32. Adanur, S., Swagat, I., Warner, S., and Chaikof, E., “Textile Prostheses for Vascular Applications”, National Textile Center 13th Annual Forum, March 20-22, 2005, Raleigh, NC.
  33. Adanur, S., Ascioglu, B, Prabir, K. P., Warner, S. B. et al, “Nano Engineered Fire Resistant Composite Fibers”, National Textile Center 13th Annual Forum, March 20-22, 2005, Raleigh, NC.
  34. Irsale, S., and Adanur, S., “Exploring Textile Stents: Prototyping and Modeling”, AU Annual Graduate Student Research Forum, March 10, 2005, Auburn, AL.
  35. Adanur, S., and Irsale, S., “Textile Prosthesis for Vascular Applications”, Presentation and Poster Session, TechTextil Symposium North America, Atlanta, GA, March 30-April 1, 2004.
  36. Adanur, S., Ascioglu, B, Prabir, K. P., Warner, S. B. et al, “Nano Engineered Fire Resistant Composite Fibers”, National Textile Center Annual Forum, February 15-17, 2004, Hilton Head, SC.
  37. Adanur, S., Swagat, I., Warner, S., and Chaikof, E., “Textile Prostheses for Vascular Applications”, National Textile Center Annual Forum, February 15-17, 2004, Hilton Head, SC.
  38. Ascioglu, B., and Adanur, S., “Nano Engineered Fire Resistant Composite Fibers”, Auburn University Annual Research Forum, Auburn, AL, 20 March 2003. This poster won the 2nd place in Engineering.
  39. Adanur, S., Ascioglu, B, Prabir, K. P., Warner, S. B. et al, “Nano Engineered Fire Resistant Composite Fibers”, National Textile Center Annual Forum, February 16-18, 2003, Hilton Head, SC.
  40. Adanur, S., and Sathendra, V., “Fabric Design and Analysis System in 3D Virtual Reality”, National Textile Center Annual Forum, February 16-18, 2003, Hilton Head, SC.
  41. Adanur S., and Onal, L., “Design and Characterization of a Novel 3D Hybrid Knitted/Woven Fibrous Structure for Composites”, 2003 NSF Design, Service and Manufacturing Grantees and Research Conference, January 6-9, 2003, Birmingham, AL.
  42. Turel, T., Adanur, S., Bakhtiyarov, S., Ahmed, A., and Beale, D., “Filling Yarn Insertion in Air-Jet Weaving”, National Textile Center Annual Forum, February 10-12, 2002, Charlotte, NC.
  43. Sathendra, V., and Adanur, S., “Fabric Design and Analysis System in 3D Virtual Reality”, National Textile Center Annual Forum, February 10-12, 2002, Charlotte, NC.
  44. Adanur, S., and Onal, L., “Factors Affecting the Mechanical Properties of Laminated Glass/Graphite-Epoxy Hybrid Composites”, 2002 NSF Design, Service and Manufacturing Grantees and Research Conference, January 7-10, 2002, San Juan, Puerto Rico.
  45. Tascan, M., and Adanur, S., “Filling Yarn Insertion in Air-Jet Weaving”, 11th Research Forum, Auburn University, March 19, 2001.
  46. Onal, L., and Adanur, S., “Impact Properties of Textile Composites”, 11th Research Forum, Auburn University, March 19, 2001.
  47. Kilinc, F. S., and Adanur, S., “3D Fabric Design and Analysis”, 11th Research Forum, Auburn University, March 19, 2001.
  48. Tascan, M., Adanur, S., Bakhtiyarov, S., Ahmed, A., and Beale, D., “Filling Yarn Insertion in Air-Jet Weaving”, National Textile Center Annual Forum, February 11-13, 2001, Myrtle Beach,
  49. Kilinc, F. S. and Adanur, S., “Fabric Design and Analysis System in 3D Virtual Reality”, National Textile Center Annual Forum, February 11-13, 2001, Myrtle Beach,
  50. Adanur, S., and Orak, H.., “Design and Manufacturing Automotive Chassis Frame with Net Shape Braided Composite Structures”, 2001 NSF Design and Manufacturing Research Conference, January 7-10, 2001, Tampa,
  51. Adanur, S., Bakhtiyarov, S., and Beale, D., “Filling Yarn Insertion in AirJet Weaving”, National Textile Center Annual Forum, January 27-29, 2000, Myrtle Beach,
  52. Adanur, S., and Xu, B., “Design and Manufacturing Automotive Chassis Frame with Net Shape Braided Composite Structures”, 2000 NSF Design and Manufacturing Research Conference, January 3-6, 2000, Vancouver, British Columbia, Canada.
  53. Adanur, S., Gowayed, Y., and Thomas, H., "On-Line Measurement of Fabric Properties ", National Textile Center Annual Forum, January 28-30, 1999, Myrtle Beach, SC.
  54. Adanur, S., and Xu, B., “Fast Net Shape Manufacturing of Braided Textile Composites”, NSF CAREER Awardees Meeting, January 10-12, 1999, Washington C.
  55. Adanur, S., and Xu, B., “Process Development of Microwave Preheating and Infrared Post Curing of Braided Polymer/Epoxy Composites”, The 1999 National Science Foundation (NSF) Design and Manufacturing Grantees Conference, January 5-8, 1999, Long Beach, CA.
  56. Adanur, S., Liao, T., and Ghosh, T., "Design and Characterization of Geotextiles for High Performance Applications", National Textile Center Annual Forum, January 29-31, 1998, Panama City,
  57. Adanur, S., Gowayed, Y., and Thomas, H., "On-Line Measurement of Fabric Properties", National Textile Center Annual Forum, January 29-31, 1998, Panama City, FL.
  58. Adanur, S., and Xu, B., "Fast, Net Shape Manufacturing of Textile Composites", National Science Foundation, Design and Manufacturing Grantees Conference, January 5-8, 1998, Monterrey, Mexico.
  59. Adanur, S., Gowayed, Y., Ghosh, T., Goswami, B., Mallick, S. B., Zhai, H., "Design and Characterization of Geotextiles for High Performance Applications", National Textile Center Annual Forum, January 28-30, 1997, Myrtle Beach,
  60. Adanur, S., Thomas, H., Gowayed, Y., "On-Line Monitoring", National Textile Center Annual Forum, January 28-30, 1997, Myrtle Beach,
  61. Adanur, S., and Xu, B., "Fast, Net Shape Manufacturing of Textile Composites", National Science Foundation, Design and Manufacturing Grantees Conference, Seattle, Washington, Jan. 7-10, 1997.
  62. Adanur, S., Mallick, S., and Zhai, H., "Analysis of Geotextile-Soil Interaction in Pull-Out Tests", IS Kyushu '96, International Symposium on Earth Reinforcement, November 12-14, 1996, Fukuoka, Japan.
  63. Adanur, S., Mallick, S., and Zhai, H., "Design and Characterization of Geotextiles for High Performance Applications", National Textile Center Annual Forum, January 24-26, 1996, Raleigh, NC.
  64. Adanur, S., et al., "Textile Structural Composites", National Textile Center Annual Forum, January 24-26, 1996, Raleigh, NC.
  65. Adanur, S., Mallick, S., and Zhai, H., Design and Characterization of Geotextiles for High Performance Applications, National Textile Center, Annual Forum, Atlanta, GA, January 26-28, 1995.
  66. Mohamed, M., Adanur, S., et al., "Textile Structural Composites”, National Textile Center, Annual Forum, January 26-28, 1995, Atlanta, GA.
  67. Adanur, S., and Tam, C. W., "Fabrication and Testing of On-loom Stitched 3-D Glass/Epoxy Laminar Composites", The 8th Annual Alabama Materials Research Conference, Tuscaloosa, AL, Sept. 26-27, 1994.
  68. Walker, B., Beale, D., Broughton, R., and Adanur, S., "Improving the Woven Fabric Production Rate by Braiding Process", National Textile Center, Annual Forum, Greenville, SC, February 1994.
  69. Mohamed, M., Adanur, S., et al., "Textile Structural Composites", National Textile Center, Annual Forum, Greenville, SC, February 1994.
  70. Walker, B., Beale, D., Broughton, R., and Adanur, S., "Improving the Woven Fabric Production Rate by Braiding Process", National Textile Center, Annual Forum, Auburn, AL, February 1993.
  71. Mohamed, M., Adanur, S., et al., "Textile Structural Composites", National Textile Center, Annual Forum, Auburn, AL, February 1993.
Last Updated: Sep 01, 2023
Samuel Ginn College of EngineeringUp to Department of Mechanical Engineering
Dr. Sabit Adanur
Professional ExperienceTeachingResearchProject HighlightsBooksPublicationsTechnical PresentationsInventionsService-ExtensionAwards