Projects

  • Novel Additive Manufacturing Qualification Methods for Army Aviation
    U.S. Army AvMC

    📅 12/23 - 11/26

  • Development of Additive Manufacturing Material Allowables for Aluminum Alloys
    U.S. Army AvMC

    📅 12/23 - 11/26

  • Acquisition of An X-ray Diffraction Contrast Tomography Instrument Enabling Research and Education Towards Establishing Microstructure-Property Relationships
    National Science Foundation (NSF), MRI Track – 1

    📅 09/23 - 08/26

  • Rapid Qualification for Additively Manufactured Safety-Critical Components
    National Science Foundation (NSF), RII Track – 2 FEC

    📅 01/22 - 12/25

  • Cold Plate Geometry Development & Productibility
    L3Harris

    📅 12/19 – 12/25

  • Additive Manufacturing Material and Process Rapid Qualification for Vehicle Applications
    U.S. Army GVSC

    📅 06/23 – 06/25

  • Vehicle Equivalency Framework Utilizing Multiple Additive Manufacturing Platforms
    U.S. Army GVSC

    📅 06/23 – 06/25

  • Additive Manufacturing Guidance for Aircraft Design & Certification
    Federal Aviation Administration (FAA)

    📅 12/20 – 12/24

  • Generation of Additive Material Allowables for Ti-6Al-4V (GAMAT)
    Boeing Company

    📅 12/22 - 12/24

  • Rapid Analysis and Manufacturing Propulsion Technology (RAMPT)
    National Aeronautics and Space Administration (NASA)

    📅 04/19 – 03/24

  • On the Structural Integrity of Additive Manufactured Parts: Defect Criticality, In-situ Monitoring, Post Fabrication Non-Destructive Evaluation, and Cyber Security
    National Institute of Standards and Technology (NIST)

    📅 10/19 – 09/24

  • Synergistic Effects of Defects & Microstructure on Mechanical Behavior of LB-PBF Metallic Materials
    National Aeronautics and Space Administration (NASA)

    📅 09/21 – 07/24

  • Additive Manufacturing Product & Process Analyses
    U.S. Army GVSC

    📅 01/22 – 01/24

  • Advancing Additive Manufacturing Directed Deposition Techniques
    National Aeronautics and Space Administration (NASA)

    📅 04/20 – 12/23

  • Cold Plate Geometry Development & Productibility
    L3Harris Technologies

    📅 12/19 – 12/23

  • Develop a Standard Work Item for Measuring Residual Stresses in Additive Manufactured Parts
    ASTM International

    📅 11/22 – 10/23

  • Federated Deep Learning for Future Ubiquitous Distributed Additive Manufacturing
    National Science Foundation (NSF)

    📅 09/21 – 08/23

  • Research and Development to Support Standardization for Additive Manufacturing: Feedstock, Process/Part Qualification, and Post-Processing
    ASTM International

    📅 10/18 – 09/23

  • Multi-material Manufacturing of Eco-Friendly & Biodegradable Paper-Based Flexible Hybrid Electronics
    National Science Foundation (NSF)

    📅 09/21 – 08/23

  • Surface Integrity of Additively Manufactured Ti-6al-4v Parts
    Federal Aviation Administration (FAA)

    📅 07/21 – 07/23

  • Launce Grant-transformative Dry Electronics Printer
    Auburn Research and Technology Fund

    📅 08/22 – 07/23

  • In Space Additive Nanomanufacturing & Dry Printing of Multi-Materials Electronics
    National Aeronautics and Space Administration (NASA)

    📅 03/22 – 02/23

  • Systematic Fatigue Test Spectrum Editing Using Wavelet Transformations Framework
    Technical Data Analysis Inc. (TDA) with U.S. Navy

    📅 03/20 – 01/23

  • Mechanical Characterization of Additively Manufactured Parts via Newly Developed Super Alloy VDM 718
    Materials Sciences LLC (MSC)

    📅 02/22 – 01/23

  • Additive Manufacturing Guidance for Aircraft Design & Certification
    Federal Aviation Administration (FAA)

    📅 12/20 – 12/22

  • Characterization of L-PBF IN718 for CMDS
    ASTM International

    📅 07/21 – 12/22

  • Advancement in Artificial Intelligence & Machine Learning for Additive Manufacturing
    National Aeronautics and Space Administration (NASA)

    📅 12/20 – 12/22

  • Evaluating the Criticality of Inherent Anomalies/Defects on the Fatigue Behavior of AM Metallic Parts
    Federal Aviation Administration (FAA)

    📅 06/20 – 11/22

  • Development of Ultra High Performance Additively Manufactured Injector Elements for Liquid Rocket and Rotating Detonation Rocket Engines
    National Aeronautics and Space Administration (NASA)

    📅 08/21 – 11/22

  • The Effect of Key Process Variables Drift on Mechanical Properties of Additive Manufactured Materials
    Federal Aviation Administration (FAA)

    📅 07/20 – 11/22

  • Specimen Design for Compression Testing of Metallic Lattice Structures
    ASTM International

    📅 11/20 – 10/22

  • NIST Center for in-situ Metrology and Process Science for Advanced Manufacturing (iMaPS)
    National Institute of Standards and Technology (NIST)

    📅 10/18 – 09/22

  • Physics-based Multiscale Additively Manufactured Superalloy Design for Optimized High Cycle Fatigue Life
    Department of Energy (DOE)

    📅 10/19 – 09/22

  • MRI: Acquisition of an X-ray Computed Nanotomography System with Planar Biaxial Material Testing to Advance Understanding of Natural and Engineered Materials
    National Science Foundation (NSF)

    📅 10/19 – 08/22

  • Additive Nanomanufacturing of Multifunctional Materials and Hybrid Structures
    National Science Foundation (NSF)

    📅 09/19 – 08/22

  • MRI: Development of a Non-Equilibrium Plasma Coupled Rapid Compression Machine by Additive Manufacturing
    National Science Foundation (NSF)

    📅 09/19 – 08/22

  • Advanced Space Power & Propulsion Partnership
    National Aeronautics and Space Administration (NASA)

    📅 09/20 – 08/22

  • Density Measurement Approaches for Additively Manufactured Parts
    ASTM International

    📅 10/21 – 07/22

  • Geometry Based Thermal Management Solution for Propulsion
    Quadrus Advanced Manufacturing LLC

    📅 02/22 – 06/22

  • Effect of Powder Reuse on the Tensile and Fatigue Properties of Directed Energy Deposited (DED) HR-1 Alloy
    National Aeronautics and Space Administration (NASA)

    📅 10/19 – 05/22

  • Ni-base Super Alloy Powder for Fabricating L-PBF Parts towards Characterization and Qualification
    National Aeronautics and Space Administration (NASA)

    📅 12/20 – 12/21

  • Additively Manufacturing Cold Plate Development and Producibility
    L3Harris Technologies

    📅 12/19 – 12/21

  • Internally Cooled Parts Using Additive Manufacturing Technology
    Mainstream Engineering Corporation

    📅 10/20 – 09/21

  • Degradation of Polymer Parts Deployed in Harsh Environments
    America Makes (Subcontract through NIAR)

    📅 06/19 – 08/21

  • Advancing Additive manufacturing Post-processing Techniques (AAPT)
    America Makes

    📅 02/19 – 08/21

  • Additive Manufacturing of Durable, Next-Generation Implants and Orthotics
    AU Presidential Award for Interdisciplinary Research (PAIR)

    📅 07/18 – 06/21

  • Characterization of Ali10Mg Specimens
    ASTM International

    📅 04/21 – 06/21

  • Cyber Security for Additive Manufacturing -Training
    America Makes with ASTM International

    📅 11/20 – 05/21

  • Machine Learning Tools to Optimize Metal Additive Manufacturing Process Parameters to Enhance Fatigue Performance of Aircraft Components
    Materials Resources LLC with U.S. Navy

    📅 05/20 – 05/21

  • Creation of 3D Printed, Custom, Bridging Implants for Fracture Stabilization Utilizing Computer Modeling
    Morris Animal Foundation Grant

    📅 09/20 – 02/21

  • Fatigue Prediction for Additive Manufactured (AM) Metallic Components
    Product Innovation and Engineering LLC (PINE) with U.S. Navy

    📅 11/19 – 10/20

  • Effect of Powder Degradation on Mechanical Performance of Additive Manufactured Inconel 718 parts
    Delta Airlines, Inc.

    📅 01/18 – 02/20

  • Powder to Study the Effects of Post Processing on the Structural Integrity of Additive Manufactured Materials
    US Navy (NAVAIR)

    📅 01/19 – 12/19

  • Enabling the Digital Twin for Additively-Manufactured Metallic Parts via Defect-Sensitive Mechanical Models
    National Aeronautics and Space Administration (NASA)

    📅 10/18 – 09/19

  • Design & Optimization of Additively Manufactured Lattice Structures for Bio-medical Implants
    Materials Sciences Corp

    📅 01/19 – 08/19

  • ASTM Center for Additive Manufacturing Excellence at Auburn University
    ASTM International

    📅 07/18 –

  • Powder to Study the Effects of Post Processing on the Structural Integrity of Additive Manufactured Materials
    U.S. Navy (NAVAIR)

    📅 06/18 – 12/18

  • Optimized Build Plate Design Tool for Metal Laser Powder Bed Additive Manufacturing
    Technical Data Analysis Inc. (TDA) with U.S. Navy

    📅 09/18 – 03/19

  • Cooling System for Laser Enclosure
    Photonwares Corporation with U.S. Navy

    📅 06/18 – 01/19

  • Additive Manufacturing of Durable Mission-Critical Components by Establishing Process-Structure-Property-Performance Relationships
    National Aeronautics and Space Administration (NASA)

    📅 10/17 – 09/18

  • Effects of Process & Design Parameters on Fatigue Behavior of Additively-Manufactured 17-4 PH Stainless Steel
    US Navy (NAVAIR)

    📅 01/17 – 05/18

  • Optimized Build Plate Design Tool for Metal Laser Powder Bed Additive Manufacturing
    Technical Data Analysis Inc. (TDA) with U.S. Navy

    📅 10/17 – 04/18

  • Fatigue Behavior & Failure Mechanisms of Additively Manufactured Inconel 718
    National Aeronautics and Space Administration (NASA)

    📅 04/17 – 04/18

  • Extending the Additive Manufacturing Technology to Novel Applications: Planning Phase
    Korea Institute of Industrial Technology (KITECH)

    📅 10/17 – 02/18