National Center for Additive Manufacturing Excellence (NCAME)

Journals

2019

"Fatigue behavior of additively manufactured 17-4 PH stainless steel: Synergistic effects of surface roughness and heat treatment"

PD Nezhadfar, R Sherestha, N Phan, N Shamsaei
International Journal of Fatigue
Vol. 124, pp. 188-204

"Fatigue crack growth behavior of additively manufactured 17-4 PH stainless steel: Effects of build orientation and microstructure"

PD Nezhadfar, E Burford, K Anderson-Wedge, B Zhang, S Shao, S Daniewicz, N Shamsaei
International Journal of Fatigue
Vol. 123, pp. 168-179

"Towards predicting differences in fatigue performance of laser powder bed fused Ti-6Al-4V coupons from the same build"

P Li, D Warner, J Pegues, M Roach, N Shamsaei, N Phan
International Journal of Fatigue
Vol. 126, pp. 284-296

"Fatigue behavior of additive manufactured 316L stainless steel parts: Effects of layer orientation and surface roughness,"

R Shrestha, J Simsiriwong, N Shamsaei
Additive Manufacturing
Vol. 28, pp. 23-38

"Powder Recycling Effects on the Tensile and Fatigue Behavior of Additively Manufactured Ti-6Al-4V Parts,"

P Carrion, A Soltani-Tehrani, N Phan, N Shamsaei
JOM
Vol. 71, pp. 963-973

"Investigation of the mechanisms by which hot isostatic pressing improves the fatigue performance of powder bed fused Ti-6Al-4V,"

P Li, D Warner, J Pegues, M Roach, N Shamsaei, N Phan
International Journal of Fatigue
Vol. 120, pp. 342-352

"Effect of heat treatments on pore morphology and microstructure of laser additive manufactured parts,"

B Zhang, W Meng, S Shao, N Phan, N Shamsaei
Material Design Process Comm
Vol. 1, pp. 1-8

"Fatigue behaviour of additive manufactured materials: An overview of some recent experimental studies on Ti‐6Al‐4V considering various processing and loading direction effects,"

R Russell, D Wells, J Waller, B Poorganji, E Ott, T Nakagawa, H Sandoval, N Shamsaei, M Seifi
Fatigue & Fracture Engineering Materials & Structures
Vol. 42, pp. 991-1009

"Qualification and certification of metal additive manufactured hardware for aerospace applications,"

R Russell, D Wells, J Waller, B Poorganji, E Ott, T Nakagawa, H Sandoval, N Shamsaei, M Seifi
Additive Manufacturing for the Aerospace Industry
Vol. , pp. 33-66

"Fatigue life estimation of additive manufactured parts in the as‐built surface condition,"

J pegues, N Shamsaei, M Roach, R Williamson
Additive Manufacturing
Vol. 36.

2018

"Depth-sensing time-dependent response of additively manufactured Ti-6Al-4V alloy,"

M Muhammad, M Masoomi, B Torries, N Shamsaei, M Haghshenas
Additive Manufacturing
Vol. 24, pp. 37-46.

"Load sequence effects and variable amplitude fatigue of superelastic NiTi,"

M Mahtabi, T Stone, N Shamsaei
International Journal of Fatigue
Vol. 148, pp. 307-315.

"Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V,"

J Pegues, M Roach, R Williamson, N Shamsaei
International Journal of Fatigue
Vol. 116, pp. 543-552.

"Overview on Microstructure- and Defect-Sensitive Fatigue Modeling of Additively Manufactured Materials,"

B Torries, A Imandoust, S Beretta, S Shao, N Shamsaei
JOM
Vol. 70, pp. 1853-1862.

"A numerical and experimental investigation of convective heat transfer during laser-powder bed fusion,"

M Masoomi, J Pegues, SM Thompson, N Shamsaei
Additive Manufacturing
Vol. 22, pp. 729-745.

"Frequency dependent deformation reversibility during cyclic loading,"

S Shao, M Khonsari, J Wang, N Shamsaei, N Li
Materials Research Letters
Vol. 6, pp. 390-397.

"Tribocorrosion Behavior of Additive Manufactured Ti-6Al-4V Biomedical Alloy,"

M Buciumeanu, A Bagheri, N Shamsaei, SM Thompson, FS Silva, B Henriques
Tribology International
Vol. 119, pp. 381-388.

"Fatigue Behavior and Cyclic Deformation of Additive Manufactured NiTi"

A. Bagheri, MJ. Mahtabi, N. Shamsaei
Journal of Materials Processing Technology
Vol. 252, pp. 440-453.

2017

"Fatigue Behaviour of Additively-Manufactured Metallic Parts"

N. Shamsaei, J. Simsiriwong
Procedia Structural Integrity
Vol. 7, pp. 3-10.

"Fatigue Behavior and Modeling of Additively Manufactured Ti-6Al-4V Including Interlayer Time Interval Effects"

B. Torries, N. Shamsaei
JOM
Vol. 69, Issue.12, pp. 2698-2705.

"Influence of Microstructure on Fatigue Crack Nucleation and Microstructurally Short Crack Growth of an Austenitic Stainless Steel"

JW. Pegues, MD. Roach, N. Shamsaei
Materials Science and Engineering: A
Vol. 707, pp. 657-667.

"Fatigue Modeling for Superelastic NiTi Considering Cyclic Deformation and Load Ratio Effects"

MJ. Mahtabi, N. Shamsaei
Shape Memory and Superelasticity
Vol. 3, Issue. 3, pp. 250-263.

"Structural Integrity of Additive Manufactured Parts: Chapter 4"

SR. Daniewicz, A. Johnson, SM. Thompson, N. Shamsaei
Laser-Based Additive Manufacturing of Metal Parts: Modeling, Optimization, and Control of Mechanical Properties
Vol. 119, pp. 381-388.

"Multiaxial Fatigue Behavior of Wrought and Additive Manufactured Ti-6Al-4V Including Surface finish effect"

A. Fatemi, R. Molaei, S. Sharifimehr, N. Phan, N. Shamsaei
International Journal of Fatigue
Vol. 100, pp. 347-366.

"Residual Stress Measurements via Neutron Diffraction of Additive Manufactured Stainless Steel 17-4 PH"

M Masoomi, N Shamsaei, RA Winholtz, J Milner, T Gnäupel-Herold, A Elwany, M Mahmoudi, SM Thompson
Data in Brief
Vol. 13, pp. 408-414.

"Quality Part Production via Multi-Laser Additive Manufacturing"

M. Masoomi, SM. Thompson, N. Shamsaei
Manufacturing Letters
Vol. 13, Aug 2017, pp. 15-20.

"Cyclic Deformation and Fatigue Data for Ti-6Al-4V ELI under Variable Amplitude Loading"

PE. Carrion, N. Shamsaei, RD. Moser
Data in Brief
Vol. 13, Aug 2017, pp. 180-186.

"Modeling Fatigue Crack Growth Behavior in Rolled AZ31 Magnesium Alloy using CTOD Based Strip Yield Modeling"

C. Cauthen, SR. Daniewicz, N. Shamsaei
International Journal of Fatigue
Vol. 96, pp. 196-207.

"Cyclic Strain Rate Effect on Martensitic Transformation and Fatigue Behaviour of an Austenitic Stainless Steel"

JW Pegues, S Shao, N Shamsaei, JA Schneider, RD Moser
Fatigue & Fracture of Engineering Materials & Structures
Vol. 40, Iss. 12, pp. 2080-2091.

"Torsional Fatigue Behavior of Wrought and Additive Manufactured Ti-6Al-4V by Powder Bed Fusion Including Surface Finish Effect,"

A. Fatemi, R. Molaei, S. Sharifimehr, N. Shamsaei, N. Phan
International Journal of Fatigue
Vol. 99 (1), pp. 187-201.

"Fatigue Behavior of Ti-6Al-4V ELI Including Mean Stress Effects,"

P.E. Carrion, N. Shamsaei, S.R. Daniewicz, R.D. Moser
International Journal of Fatigue
Vol. 99, pp. 87-100.

"Laser Powder Bed Fusion of Ti-6Al-4V Parts: Thermal Modeling and Mechanical Implications,"

M. Masoomi, S.M. Thompson, N. Shamsaei
International Journal of Machine Tools & Manufacture
Vol. 118-119 (C), pp. 73-90.

"Additive Manufacturing of Fatigue Resistant Materials: Challenges and Opportunities,"

A. Yadollahi & N. Shamsaei
International Journal of Fatigue
Vol. 98, pp. 14-31.

"Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification,"

M. Seifi, M. Gorelik, J. Waller, N. Hrabe, N. Shamsaei, S.R. Daniewicz,
JOM
Vol. 69 (3), pp. 439-455.

"Solubility of Argon in Laser Additive Manufactured α-Titanium under Hot Isostatic Pressing Condition,"

S. Shao, M.J. Mahtabi, N. Shamsaei, S.M. Thompson,
Computational Materials Science
Vol. 131, pp. 209-219

"Experimental Investigation of a Multi-Layered Oscillating Heat Pipe Additively Manufactured from Ti-6Al-4V Powder,"

O.T. Ibrahim, J.G. Monroe, S.M. Thompson, N. Shamsaei, H. Bilheux, A. Elwany, L. Bian.
International Journal of Heat and Mass Transfer
Vol. 108 (A), pp. 1036-1047.

"Fatigue Modeling for a Thermoplastic Polymer Under Mean Strain and Variable Amplitude Loadings,"

R. Shrestha, J. Simsiriwong, N. Shamsaei
International Journal of Fatigue
Vol. 100 (1), pp. 429-443.

"Microstructure, Fatigue Behavior, and Failure Mechanisms of Direct Laser Deposited Inconel 718,"

A.S. Johnson, S. Shao, N. Shamsaei, S.M. Thompson, L. Bian
JOM
Vol. 69 (3), pp. 597-603.

"Effects of Building Orientation and Heat Treatment on Fatigue Behavior of Selective Laser Melted 17-4 PH Stainless Steel,"

A. Yadollahi, N. Shamsaei, S.M. Thompson, A. Elwany, L. Bian.
International Journal of Fatigue
Vol. 94 (2), pp. 218-235.

"Modeling Fatigue Crack Growth Behavior in Rolled AZ31 Magnesium Alloy using CTOD Based Strip Yield Modeling,"

C. Cauthen, S.R. Daniewicz, N. Shamsaei
International Journal of Fatigue
Vol. 96, pp. 196-207.

"Accelerated Process Optimization for Laser-Based Additive Manufacturing by Leveraging Similar Prior Studies,"

A. Aboutaleb, L. Bian, A. Elwany, N. Shamsaei, S.M. Thompson, G. Tapia
IIE Transactions
Vol. 49 (1) 

"Mechanical Properties and Microstructural Characterization of Selective Laser Melted 17-4 PH Stainless Steel,"

M. Mahmoudi, A. Yadollahi, A. Elwany, N. Shamsaei, S.M. Thompson, L. Bian
Rapid Prototyping
Vol. 23 (2),

"Analysis and Comparison of Internal and External Temperature Measurements of a Tubular Oscillating Heat Pipe,"

J.G. Monroe, Z.S. Aspin, J.D. Fairley, S.M. Thompson
Experimental Thermal and Fluid Science
Vol. 84, pp. 165-178.

2016

"Utilization of a Microstructure Sensitive Fatigue Model for Additively Manufactured Ti-6Al-4V,"

B. Torries, A.J. Sterling, N. Shamsaei, S.M. Thompson, S.R. Daniewicz 
Rapid Prototyping Journal
Vol. 22 (5), pp. 817-825.

"Additive Manufacturing of Biomedical Implants: A Feasibility Assessment via Supply-Chain Cost Analysis,"

A. Emelogu, M. Marufuzzaman, S.M. Thompson, N. Shamsaei, L. Bian
Additive Manufacturing
Vol. 11, pp. 97-113.

"Load History and Sequence Effects on Cyclic Deformation and Fatigue Behavior of a Thermoplastic Polymer,"

J.R. Shrestha, J. Simsiriwong, N. Shamsaei
Polymer Testing
Vol. 56, pp. 99-109.

"A Modified Energy-Based Approach for Fatigue Life Prediction of Superelastic NiTi in Presence of Tensile Mean Strain and Stress,"

M.J. Mahtabi, N. Shamsaei
International Journal of Mechanical Sciences
Vol. 117, pp. 321-333.

"Mean Strain Effects on Cyclic Deformation and Fatigue Behavior of Polyether Ether Ketone (PEEK),"

R. Shrestha, J. Simsiriwong, N Shamsaei
Polymer Testing
Vol. 55, pp. 69-77.