National Center for Additive Manufacturing Excellence (NCAME)

Journal Publications

Dexamethasone Eluting 3D Printed Metal Devices for Bone Injuries

I Poudel, M Annaji, RD Arnold, A Kaddouni, N Shamsaei,S Lee, J Pegues, Z Ahmadi, MS Samani, K Corriveau, RJ Babu
Therapeutic Delivery
https://doi.org/10.4155/tde-2020-0014

Multiaxial High-cycle Fatigue Life Prediction Under Random Spectrum Loadings

H Wei, P Carrion, J Chen, A Imanian, N Shamsaei, N Iyyer, Y Liu
International Journal of Fatigue
https://doi.org/10.1016/j.ijfatigue.2019.105462

Fatigue Behavior and Microstructural Evolution of Additively Manufactured Inconel 718 under Cyclic Loading at Elevated Temperature

PD Nezahadfar, AS Johnson, N Shamsaei
International Journal of Fatigue
https://doi.org/10.1016/j.ijfatigue.2020.105598

Fatigue of Additive Manufactured Ti-6Al-4V, Part II: The Relationship Between Microstructure, Material Cyclic Properties, and Component Performance

R Molaei, A Fatemi, N Sanaei, J Pegues, N Shamsaei, S Shao, P Li, DH Warner, N Phan
International Journal of Fatigue
https://doi.org/10.1016/j.ijfatigue.2019.105363

Fatigue of Additive Manufactured Ti-6Al-4V, Part I: The Effects of Powder Feedstock, Manufacturing, and Post Process Conditions on the Resulting Microstructure and Defects

JW Pegues, S Shao, N Sanaei, N Shamsaei, A. Fatemi, DH Warner,P Li, N Phan
International Journal of Fatigue
https://doi.org/10.1016/j.ijfatigue.2019.105358

Effect of alloying elements on the γ’ antiphase boundary energy in Ni-base superalloys

M Dodaran, AH Ettefagh, SM Guo, MM Khonsari, WJ Meng, N Shamsaei, S Shao
Intermetallics
Vol. 117, 8-15

High Cycle Fatigue Behavior and Life Prediction for Additively Manufactured 17-4 PH Stainless Steel: Effect of Sub-surface Porosity and Surface Roughness

S Romano, PD Nezhadfar, N Shamsaei, M Seifi, S Beretta
Theoretical and Applied Fracture Mechanics
https://doi.org/10.1016/j.tafmec.2020.102477)

Effects of Postprocess Thermal Treatments on Static and Cyclic Deformation Behavior of Additively Manufactured Austenitic Stainless Steel

JW Pegues, MD Roach, N Shamsaei
JOM
72, pages1355–1365(2020)

Additive manufacturing of fatigue resistant austenitic stainless steels by understanding process-structure–property relationships

JW Pegues, MD Roach, N Shamsaei
Materials Research Letters
Vol. 8 (1), 8-15

Low Temperature Growth of Cu Thin Films on Tin(001) Templates: Structure and Energetics

X Zhang, S Shao, ASM Miraz, CD Wick, BR Ramachandran, WJ Meng
Materialia
pp. 100748

On the Failure Mechanisms of Cr-coated 316 Stainless Steel in Bending Fatigue Tests

B Zhang, A Haghshenas, X Zhang, S Shao, MM Khonsari, S Guo, W Meng
International Journal of Fatigue
pp. 105733

Understanding of Plasticity Size-effect Governed Mechanical Response and Incomplete Die Filling in a Miscroscale Double-punch Molding Configuration

B Zhang, MS Dodaran, S Shao, J Choi, S Park, WJ Meng
Elsevier
pp. 105406

2019

Tribological behavior of 17–4 PH stainless steel fabricated by traditional manufacturing and laser-based additive manufacturing methods

K.C. Sanjeev, P.D. Nezhadfar, C. Phillips, M.S. Kennedy, N. Shamsaei, R.L. Jackson
Wear
Vol. 440-441,15 December 2019, 203100

An investigation into specimen property to part performance relationships for laser beam powder bed fusion additive manufacturing

R Shrestha, N Shamsaei, M Seifi, N Phan
Additive Manufacturing
Vol. 29, October 2019, 100807

Fatigue data for laser beam powder bed fused 17-4 PH stainless steel specimens in different heat treatment and surface roughness conditions

PD Nezhadfar, R Shrestha, N Phan, N Shamsaei
Data In Brief
Vol. 25, August 2019, 104215

"Fatigue behavior of additively manufactured 17-4 PH stainless steel: Synergistic effects of surface roughness and heat treatment"

PD Nezhadfar, R Sherestha, N Phan, N Shamsaei
International Journal of Fatigue
Vol. 124, pp. 188-204

"Fatigue crack growth behavior of additively manufactured 17-4 PH stainless steel: Effects of build orientation and microstructure"

PD Nezhadfar, E Burford, K Anderson-Wedge, B Zhang, S Shao, S Daniewicz, N Shamsaei
International Journal of Fatigue
Vol. 123, pp. 168-179

"Towards predicting differences in fatigue performance of laser powder bed fused Ti-6Al-4V coupons from the same build"

P Li, D Warner, J Pegues, M Roach, N Shamsaei, N Phan
International Journal of Fatigue
Vol. 126, pp. 284-296

"Fatigue behavior of additive manufactured 316L stainless steel parts: Effects of layer orientation and surface roughness,"

R Shrestha, J Simsiriwong, N Shamsaei
Additive Manufacturing
Vol. 28, pp. 23-38

"Powder Recycling Effects on the Tensile and Fatigue Behavior of Additively Manufactured Ti-6Al-4V Parts,"

P Carrion, A Soltani-Tehrani, N Phan, N Shamsaei
JOM
Vol. 71, pp. 963-973

"Investigation of the mechanisms by which hot isostatic pressing improves the fatigue performance of powder bed fused Ti-6Al-4V,"

P Li, D Warner, J Pegues, M Roach, N Shamsaei, N Phan
International Journal of Fatigue
Vol. 120, pp. 342-352

"Effect of heat treatments on pore morphology and microstructure of laser additive manufactured parts,"

B Zhang, W Meng, S Shao, N Phan, N Shamsaei
Material Design Process Comm
Vol. 1, pp. 1-8

"Effect of heat treatments on microstructure/small-scale properties of additive manufactured Ti-6Al-4V"

M Muhammad, JW Pegues, N Shamsaei, M Haghshenas
The International Journal of Advanced Manufacturing Technology
August 2019, Volume 103, Issue 9–12, pp 4161–4172

"Fatigue behaviour of additive manufactured materials: An overview of some recent experimental studies on Ti‐6Al‐4V considering various processing and loading direction effects,"

R Russell, D Wells, J Waller, B Poorganji, E Ott, T Nakagawa, H Sandoval, N Shamsaei, M Seifi
Fatigue & Fracture Engineering Materials & Structures
Vol. 42, pp. 991-1009

"Qualification and certification of metal additive manufactured hardware for aerospace applications,"

R Russell, D Wells, J Waller, B Poorganji, E Ott, T Nakagawa, H Sandoval, N Shamsaei, M Seifi
Additive Manufacturing for the Aerospace Industry
Vol. , pp. 33-66

"Fatigue life estimation of additive manufactured parts in the as‐built surface condition,"

J pegues, N Shamsaei, M Roach, R Williamson
Additive Manufacturing
Vol. 36.

2018

"Depth-sensing time-dependent response of additively manufactured Ti-6Al-4V alloy,"

M Muhammad, M Masoomi, B Torries, N Shamsaei, M Haghshenas
Additive Manufacturing
Vol. 24, pp. 37-46.

"Load sequence effects and variable amplitude fatigue of superelastic NiTi,"

M Mahtabi, T Stone, N Shamsaei
International Journal of Fatigue
Vol. 148, pp. 307-315.

"Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V,"

J Pegues, M Roach, R Williamson, N Shamsaei
International Journal of Fatigue
Vol. 116, pp. 543-552.

"Overview on Microstructure- and Defect-Sensitive Fatigue Modeling of Additively Manufactured Materials,"

B Torries, A Imandoust, S Beretta, S Shao, N Shamsaei
JOM
Vol. 70, pp. 1853-1862.

"A numerical and experimental investigation of convective heat transfer during laser-powder bed fusion,"

M Masoomi, J Pegues, SM Thompson, N Shamsaei
Additive Manufacturing
Vol. 22, pp. 729-745.

"Frequency dependent deformation reversibility during cyclic loading,"

S Shao, M Khonsari, J Wang, N Shamsaei, N Li
Materials Research Letters
Vol. 6, pp. 390-397.

"Tribocorrosion Behavior of Additive Manufactured Ti-6Al-4V Biomedical Alloy,"

M Buciumeanu, A Bagheri, N Shamsaei, SM Thompson, FS Silva, B Henriques
Tribology International
Vol. 119, pp. 381-388.

"Fatigue Behavior and Cyclic Deformation of Additive Manufactured NiTi"

A. Bagheri, MJ. Mahtabi, N. Shamsaei
Journal of Materials Processing Technology
Vol. 252, pp. 440-453.

2017

"Fatigue Behaviour of Additively-Manufactured Metallic Parts"

N. Shamsaei, J. Simsiriwong
Procedia Structural Integrity
Vol. 7, pp. 3-10.

"Fatigue Behavior and Modeling of Additively Manufactured Ti-6Al-4V Including Interlayer Time Interval Effects"

B. Torries, N. Shamsaei
JOM
Vol. 69, Issue.12, pp. 2698-2705.

Cyclic strain rate effect on martensitic transformation and fatigue behaviour of an austenitic stainless steel

JW Pegues, S Shao, N Shamsaei, JA Schneider, RD Moser
Fatigue & Fracture of Engineering Materials & Structures
Vol. 40 (12), 2080-2091

"Influence of Microstructure on Fatigue Crack Nucleation and Microstructurally Short Crack Growth of an Austenitic Stainless Steel"

JW. Pegues, MD. Roach, N. Shamsaei
Materials Science and Engineering: A
Vol. 707, pp. 657-667.

"Fatigue Modeling for Superelastic NiTi Considering Cyclic Deformation and Load Ratio Effects"

MJ. Mahtabi, N. Shamsaei
Shape Memory and Superelasticity
Vol. 3, Issue. 3, pp. 250-263.

"Structural Integrity of Additive Manufactured Parts: Chapter 4"

SR. Daniewicz, A. Johnson, SM. Thompson, N. Shamsaei
Laser-Based Additive Manufacturing of Metal Parts: Modeling, Optimization, and Control of Mechanical Properties
Vol. 119, pp. 381-388.

"Multiaxial Fatigue Behavior of Wrought and Additive Manufactured Ti-6Al-4V Including Surface finish effect"

A. Fatemi, R. Molaei, S. Sharifimehr, N. Phan, N. Shamsaei
International Journal of Fatigue
Vol. 100, pp. 347-366.

"Residual Stress Measurements via Neutron Diffraction of Additive Manufactured Stainless Steel 17-4 PH"

M Masoomi, N Shamsaei, RA Winholtz, J Milner, T Gnäupel-Herold, A Elwany, M Mahmoudi, SM Thompson
Data in Brief
Vol. 13, pp. 408-414.

"Quality Part Production via Multi-Laser Additive Manufacturing"

M. Masoomi, SM. Thompson, N. Shamsaei
Manufacturing Letters
Vol. 13, Aug 2017, pp. 15-20.

"Cyclic Deformation and Fatigue Data for Ti-6Al-4V ELI under Variable Amplitude Loading"

PE. Carrion, N. Shamsaei, RD. Moser
Data in Brief
Vol. 13, Aug 2017, pp. 180-186.

"Modeling Fatigue Crack Growth Behavior in Rolled AZ31 Magnesium Alloy using CTOD Based Strip Yield Modeling"

C. Cauthen, SR. Daniewicz, N. Shamsaei
International Journal of Fatigue
Vol. 96, pp. 196-207.

Energy harvesting via thermo-piezoelectric transduction within a heated capillary

JG Monroe, M Bhandari, J Fairley, OJ Myers, N Shamsaei, SM Thompson
Applied Physics Letters
Vol. 111 (4), 043902

"Torsional Fatigue Behavior of Wrought and Additive Manufactured Ti-6Al-4V by Powder Bed Fusion Including Surface Finish Effect,"

A. Fatemi, R. Molaei, S. Sharifimehr, N. Shamsaei, N. Phan
International Journal of Fatigue
Vol. 99 (1), pp. 187-201.

"Fatigue Behavior of Ti-6Al-4V ELI Including Mean Stress Effects,"

P.E. Carrion, N. Shamsaei, S.R. Daniewicz, R.D. Moser
International Journal of Fatigue
Vol. 99, pp. 87-100.

An investigation of a multi-layered oscillating heat pipe additively manufactured from Ti-6Al-4V powder

OT Ibrahim, JG Monroe, SM Thompson, N Shamsaei, H Bilheux, A Elwany, L Bian
International Journal of Heat and Mass Transfer
Vol. 108 Part A, May 2017, Pages 1036-1047

"Laser Powder Bed Fusion of Ti-6Al-4V Parts: Thermal Modeling and Mechanical Implications,"

M. Masoomi, S.M. Thompson, N. Shamsaei
International Journal of Machine Tools & Manufacture
Vol. 118-119 (C), pp. 73-90.

"Additive Manufacturing of Fatigue Resistant Materials: Challenges and Opportunities,"

A. Yadollahi & N. Shamsaei
International Journal of Fatigue
Vol. 98, pp. 14-31.

"Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification,"

M. Seifi, M. Gorelik, J. Waller, N. Hrabe, N. Shamsaei, S.R. Daniewicz,
JOM
Vol. 69 (3), pp. 439-455.

"Solubility of Argon in Laser Additive Manufactured α-Titanium under Hot Isostatic Pressing Condition,"

S. Shao, M.J. Mahtabi, N. Shamsaei, S.M. Thompson,
Computational Materials Science
Vol. 131, pp. 209-219

"Experimental Investigation of a Multi-Layered Oscillating Heat Pipe Additively Manufactured from Ti-6Al-4V Powder,"

O.T. Ibrahim, J.G. Monroe, S.M. Thompson, N. Shamsaei, H. Bilheux, A. Elwany, L. Bian.
International Journal of Heat and Mass Transfer
Vol. 108 (A), pp. 1036-1047.

"Fatigue Modeling for a Thermoplastic Polymer Under Mean Strain and Variable Amplitude Loadings,"

R. Shrestha, J. Simsiriwong, N. Shamsaei
International Journal of Fatigue
Vol. 100 (1), pp. 429-443.

"Microstructure, Fatigue Behavior, and Failure Mechanisms of Direct Laser Deposited Inconel 718,"

A.S. Johnson, S. Shao, N. Shamsaei, S.M. Thompson, L. Bian
JOM
Vol. 69 (3), pp. 597-603.

"Effects of Building Orientation and Heat Treatment on Fatigue Behavior of Selective Laser Melted 17-4 PH Stainless Steel,"

A. Yadollahi, N. Shamsaei, S.M. Thompson, A. Elwany, L. Bian.
International Journal of Fatigue
Vol. 94 (2), pp. 218-235.

"Modeling Fatigue Crack Growth Behavior in Rolled AZ31 Magnesium Alloy using CTOD Based Strip Yield Modeling,"

C. Cauthen, S.R. Daniewicz, N. Shamsaei
International Journal of Fatigue
Vol. 96, pp. 196-207.

"Accelerated Process Optimization for Laser-Based Additive Manufacturing by Leveraging Similar Prior Studies,"

A. Aboutaleb, L. Bian, A. Elwany, N. Shamsaei, S.M. Thompson, G. Tapia
IIE Transactions
Vol. 49 (1) 

"Mechanical Properties and Microstructural Characterization of Selective Laser Melted 17-4 PH Stainless Steel,"

M. Mahmoudi, A. Yadollahi, A. Elwany, N. Shamsaei, S.M. Thompson, L. Bian
Rapid Prototyping
Vol. 23 (2),

"Analysis and Comparison of Internal and External Temperature Measurements of a Tubular Oscillating Heat Pipe,"

J.G. Monroe, Z.S. Aspin, J.D. Fairley, S.M. Thompson
Experimental Thermal and Fluid Science
Vol. 84, pp. 165-178.

2016

"Utilization of a Microstructure Sensitive Fatigue Model for Additively Manufactured Ti-6Al-4V,"

B. Torries, A.J. Sterling, N. Shamsaei, S.M. Thompson, S.R. Daniewicz 
Rapid Prototyping Journal
Vol. 22 (5), pp. 817-825.

"Additive Manufacturing of Biomedical Implants: A Feasibility Assessment via Supply-Chain Cost Analysis,"

A. Emelogu, M. Marufuzzaman, S.M. Thompson, N. Shamsaei, L. Bian
Additive Manufacturing
Vol. 11, pp. 97-113.

Data indicating temperature response of Ti–6Al–4V thin-walled structure during its additive manufacture via Laser Engineered Net Shaping

GJ Marshall, SM Thompson, N Shamsaei
Data In Brief
Vol. 7, 697-703

"Load History and Sequence Effects on Cyclic Deformation and Fatigue Behavior of a Thermoplastic Polymer,"

J.R. Shrestha, J. Simsiriwong, N. Shamsaei
Polymer Testing
Vol. 56, pp. 99-109.

"A Modified Energy-Based Approach for Fatigue Life Prediction of Superelastic NiTi in Presence of Tensile Mean Strain and Stress,"

M.J. Mahtabi, N. Shamsaei
International Journal of Mechanical Sciences
Vol. 117, pp. 321-333.

"Mean Strain Effects on Cyclic Deformation and Fatigue Behavior of Polyether Ether Ketone (PEEK),"

R. Shrestha, J. Simsiriwong, N Shamsaei
Polymer Testing
Vol. 55, pp. 69-77.

Strain-based fatigue data for Ti–6Al–4V ELI under fully-reversed and mean strain loads

PE Carrion, N Shamsaei
Data In Brief
Vol. 7, 12-15

Quantification of tensile damage evolution in additive manufactured austenitic stainless steels

A Yadollahi, N Shamsaei, Y Hammi, MF Horstemeyer
Materials Science and Engineering
Vol. 657, (7) 399-405

Data related to cyclic deformation and fatigue behavior of direct laser deposited Ti–6Al–4V with and without heat treatment

AJ Sterling, B Torries, N Shamsaei, SM Thompson
Data In Brief
Vol. 6, 970-973

Fatigue data for polyether ether ketone (PEEK) under fully-reversed cyclic loading

R Shrestha, J Simsiriwong, N Shamsaei
Data In Brief
Vol. 6, 881-884

Understanding the microstructure formation of Ti-6Al-4V during direct laser deposition via in-situ thermal monitoring

GJ Marshall, WJ Young, SM Thompson, N Shamsaei, SR Daniewicz, S Shao
JOM
Vol. 68 (3), 778–790

Transferability of the two‐parameter fracture criterion for 2219 aluminum alloy cracked configurations

MJ Mahtabi, A Sanford, N Shamsaei, JC Newman Jr
Fatigue & Fracture of Engineering Materials & Structures
Vol. 39 (3), 335-345

Multiaxial fatigue modeling for Nitinol shape memory alloys under in-phase loading

MJ Mahtabi, N Shamsaei
Journal of the Mechanical behavior of Biomedical Materials
Vol. 55, 236-249

Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V

AJ Sterling, B Torries, N Shamsaei, SM Thompson, DW Seely
Materials Science and Engineering
Vol. 655 (8) 100-112

Fatigue life predictions for irradiated stainless steels considering void swellings effects

RW Fuller, N Shamsaei, J Simsiriwong
Engineering Failure Analysis
Vol. 59, 79-98

Cyclic deformation and fatigue behavior of polyether ether ketone (PEEK)

R Shrestha, J Simsiriwong, N Shamsaei, RD Moser
International Journal of Fatigue
Vol. 82, 411-427